732330
4
Zoom out
Zoom in
Previous page
1/56
Next page
15. Do not immerse the motor unit in water.
DEVICE DESCRIPTION
1 Carrying handle 2 Motor housing
3 Lid 4 ON/OFF swich
5 Clamp lock location 6 Fastening clamps
7 Vacuum tank 8 Suction hose
9 Suction wand 10 Filter
USING THE VACUUM
Prior to starting vacuuming, do the following:
– Open the cover (3) by releasing the cover clamps (6).
– Remove all the accessories from the tank (7).
– Insert the filter (10).
– Place the motor housing (2) on the vacuum tank (7).
– Snap the fastening clamps (6) in place (5) on the motor housing. After closing the clamps you will feel some slack – this is consistent
with the vacuum cleaner design. During the vacuum cleaner operation the motor housing will be firmly fixed to the tank. Any attempt to
close the clamp in a different position will result in breaking it and causing irreversible damage.
– Insert the wider end of the suction hose (8) into the air intake opening on vacuum tank (7).
Attach the suction wands (9) to the other end of the hose.
– Turn the vacuum on with the on/off switch (2).
– If during the vacuuming the vacuum tank is fully , stop vacuuming and empty the tank (7).
CLEANING AND MAINTENANCE
– Turn off the vacuum and unplug the power cord.
– Disconnect the suction hose and suction wand.
– Open the clamps and take off the motor housing.
– Wash the tank (7).
– Remove the sponge filter (10) shake and wash under running water.
Assemble the vacuum cleaner.
TECHNICAL DATA
Power supply: 220-240V~50Hz
Nominal power: 600W Max: 1000W
Do not handle the appliance or power cord with
wet hands.
16. For household use only.
17. Do not use the vacuum cleaner to pick up flammable items (such as fuel, solvents).
18. Do not vacuum objects with sharp edges (e.g. broken glass).
19. Do not aim the vacuum cleaner toward other people or animals.
20. The vacuum cleaner may be used only on dry surfaces.
21. Use extra care when vacuuming stairs.
22. Do not block any vents.
23. Do not operate the vacuum cleaner without the filter. Use only original accesories.
24. Do not pull the vacuum cleaner by the hose or power cord
25. Make sure that the power cord is not wedged by a door and does not get jammed.
When moving the vacuum cleaner please note the length of the power cord. Pulling the
vacuum cleaner suddenly when the cord is taut may damage it.
26. Before vacuum vag,wait until the fire goes out and the hearth to cool down below 50
degrees.
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding
waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous
components, which may effect the environment. Do not dispose this appliance in the common waste bin.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7040 in the language / languages: All languages as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info