799984

Adler AD 4813 Manual

9
Zoom out
Zoom in
Previous page
1/108
Next page
9
inside fuse will be broken due to wrong way of operation. In such situation the device cannot work anymore.
REMARK: When the device is clogged due to some object inside the worm gear such us bone, switch off the device immediately.
Kebbe function operation
Use your favorite recipe for the stuffing and an outside dough of Kebbe.
1.Remove the cutting plate (14, 15 or 16) and cross cutting blade (10).
2.Place kebbe attachments (11) onto the worm gear shaft (9) shaft together. Next fit both protrudes in slots. Look at picture 8.
3.Screw the nut (13) into place until tight. Look at picture 9. Do not over tighten.
4. Use the food pusher (1) to move previously prepared dough through the grinding chamber (8) to get cylindrical shape Kebbe dough.
Look at picture 10.
5.Form kebbe as illustrated at picture 11 and deep fry.
Sausage function operation
1.Before starting please assemble sausage attachment (12) as shown at picture 12.
2.Use the food pusher (1) to move slowly the food into the gut overlapped on the sausage attachment (12).
Shredding function operation
1.Press the grinder chamber button (3), hold the shredder head (21) and insert it into the motor gear nest (7). When inserting please pay
your attention the shredder head (21) must be slanted. Look at picture 13. Then move the shredder head (21) anticlockwise, so that the
head being fastened tightly .
2.Put one of shredding attachments (17 or 18 or 19) into the shredder head (21). Look at picture 14.
Note: The chosen shredding attachment must be place deeply.
3. The knob (5) switch to “ON” position to start cutting. Move the food from the tray (2) to the shredder head (21) and then push down it by
the food pusher (20) with not big power. Look at picture 14.
4. After use switch the device off and unplug it from the power supply.4. After use switch the device off and unplug it from the power
supply.
Disassembling
1.Make sure that the motor has stopped completely.
2.Disconnect the plug from the power outlet.
3.Disassemble by reversing all steps from 1-7 pictures.
4.To remove the cutting plate easily, place a knife between the cutting plate and the grinding chamber (8) as illustrated at picture 16 and
lift it up.
5.Press the grinding chamber button (3)，move the grinding chamber (8) as per direction illustrated at picture 17. Then you can take out
the grinding chamber (8).
CLEANING AND MAINTENANCE
Look at chart C for help you clean the device in correct way.
1.Before cleaning the device, be sure the power cord unplugged from the power outlet and the speed control knob is on the "0" position.
Let the device cools down before cleaning. Remove meat, etc.
2.Disassemble all accessories from motor unit (6). Do not clean the accessories while mounted on the machine's drive assembly.
3.Don't use aggressive detergents to clean the motor housing (6), as it may remove the informational graphic symbols such as: scale,
safety marks, etc.
4.Do not wash the metal parts in dishwashers. Aggressive cleaning agents used in dishwashers cause the metal parts to turn black. Use
soft brush. A bleaching solution containing chlorine will discolor aluminum surfaces. Handwash the metal parts using traditional washing-
up liquid.
5.Wipe the external parts with kitchen towel or soft cloth.
6. Do not use abrasive materials to clean the device.
7. Wipe all the cutting parts by vegetable oil-wet cloth.
8. Do not immerse the motor unit (6) in water, but only wipe it with a damp cloth.
TECHNICAL DATA
Power supply: 220-240V ~50/60Hz
Power: 600W
Max Power: 2000W
Max operation time in one cycle: 18 minutes.
Minimum rest time between cycles: 10 minutes at least.
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 4813 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4813 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info