797769
4
Zoom out
Zoom in
Previous page
1/68
Next page
4
24. Observe the maximum uninterrupted operating time of the unit of 15 seconds. After
the continuous operating time of 15 seconds, wait 3 minutes before turning the unit back
on. Exceeding the operating time of the appliance and the absence of sufficient breaks
can lead to irreversible engine damage.
16. The blades are very sharp. The highest caution is offered. Before replacing the
mixers, unplug the power cord from the wall outlet.
18. Do not cover the ventilation openings in the housing during operation.
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
15. The exchange of accessories may only be carried out with the device switched off.
19. For washing the case, do not use any heavy cleaning agents because they can be
used to remove graphical information symbols, e.g. Signs, warning photograms, etc.
21. Never touch with wet hands.
20. Never use the appliance for hot oil or grease (hot products).
17. Only use original accessories that are included in the scope of supply.
22. The appliance is not intended for crushing ice, bone and other hard products or for
grinding nuts and coffee.
23. During the mixing process, never place your hands or cutlery into the container.
25. When the appliance is dirty unplug it from the mains before cleaning.
26. Before first use, wash thoroughly and dry the appliance (see: Cleaning and
maintenance).
PRODUCT DESCRIPTION
1. BLENDER
a) ON/OFF switch, I speed b) ON/OFF switch, II speed c) motor part
d) blending shaft (removable)
2. CHOPPER
a) lid b) chopping blade c) chopper bowl d) anti-slip rubber ring
3. WHISK
a)gearbox b) whisk
4. BEAKER
USING THE DEVICE
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing and
milkshakes.
1.Attach the blending shaft (1d) to the motor part (1c). Turn it until it is locked.
2.Place the blending shaft into the beaker (4). Then press the button I speed (1a) or II speed (1b).
During processing, always hold the blender with one hand and the beaker (4) in the other hand.
3. After use, unplug the device from a power socket. Remove blending shaft (1d) from the motor part (1c).
USING CHOPPER AND WHISK
Chopper: Chopper is perfectly suited for food, such as meat, cheese, onion, herbs, etc.
1.Always place the chopper bowl (2c) on the flat, dry surface. Place the chopping blade (2b) on the center pin of the chopper bowl
(2c).
2. Place the food in the chopper bowl (2c).
3. Cover the chopper bowl (2c) with the lid (2a). Press and turn it until it locks.
4. Attach the motor part (1c) to the chopper's lid (2a). Turn it until it locks.
5. Press desired speed button (1a) or (1b).
During processing, hold the blender with one hand and the chopper bowl with the other hand.
6. After use, unplug the device from a power socket. Detach motor part (1c) from the lid (2a). Open the lid (2a) and carefully take off the
chopping blade (2b).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 4620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4620 in the language / languages: All languages as an attachment in your email.

The manual is 4.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info