Manual Adler AD 4496 (page 5 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish)

799976

Zoom out

Zoom in

1/96

heating mode to warm-keeping mode. Time on the display (3) will start counting down.

Time on the display (3) will start counting down after reaching the set temperature (2).

4. Fill the device with water to cover 3⁄4 of the highest jar with water. Do not exceed the maximum mark on the water tank (9).

After you finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand.

Never pull the power cable!!!

1. Place e rack (10) on the bottom of device.

The device will now start to heat up, which can take up to 90 min.

6. After the set time has elapsed, the device automatically switches off and a signal tone sounds

7. Place the appliance in the sink or tub and drain the water by pressing the tap (6). Move the device only by holding it by handles (7).

Note: Set the temperature and time according to the cooking chart . The time indicated there is counted from the point at which the

desired temperature is reached.

2. Put on the lid (8), set the desired temperature by temperature control knob (1) max 100˚C and set the desired time by time control

knob(4) max 180 minutes, and then push the time control knob (1) when the desired temperature is reached, the device automatically

switches to keep warm mode. Time on the display (3) will start counting down.

The appliance can be used both for boiling food and for heating water, other liquids and pasteurization.

Once the set temperature is reached, the unit automatically switches from

10. After the appliance has cooled down, remove the jars with oven gloves as they will be hot for a long time. Allow the jars to cool

completely.

Heating liquids

After the set time has elapsed, the device automatically switches off and a signal tone sounds

5. Put on the lid (8) on the device and set the desired time by time control knob (4) and set the desired temperature by temperature

control knob (1) then push the temperature control knob (1).

3. Stir the drink regularly to distribute the heat evenly.

4. If you want to fill the drink, hold a cup under the tap (6) and push the tap down. When the cup is full release the tap (6).

Pasteurization.

Note: Do not use the tap when heating liquids with pieces of food (fruit punch, soup etc.) otherwise it will clog the tap.

Allow the appliance to cool down and remove the water.

To start the device, set the timer to 60 minutes by time control knob (4) and then push the temperature control knob (1).

Note: If you heat liquids, the device may be filled up to the maximum mark only. Failure to do so could cause liquid to leak when the

device is heated.

When the time has elapsed, the appliance switches off automatically.

1. Add the desired drink or water to the device.

2. Put up jars with food on the rack as shown in the illustration (B).

1.Allow the device to cool down completely before cleaning.

4. Wipe the case with a damp, soft cloth. Then wipe with a dry cloth.

2.Always unplug the appliance before cleaning.

3. Clean the bottom of the pot with a soft brush or a damp cloth. Never use sharp or hard objects to avoid damaging the surface .

Cleaning:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4496 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Adler AD 4496 Manual

Product: