Manual Adler AD 4495 (page 4 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish)

799975

Zoom out

Zoom in

1/68

5.You can clean the frother by pouring water into it, adding a drip of dish soap and running for one cycle (this prevents the whisk from

blocking by milk sediments accumulating on the agitator shaft seal).

TECHNICAL DATA:

Power: 500W

Capacity: frothed: 130ml / heated: 300ml

Power supply: 220-240V ~50/60Hz

15. NOTE: The milk frother has a heating function. Be very careful while opening the lid

and pouring milk in so as to avoid getting burnt.

16. To avoid being splashed with milk or foam (which may be hot), always put the lid on the

milk frother before you switch it on.

should be consulted in this regard.

1. DEVICE DESCRIPTION

17. After each use wait for 2 minutes to allow the thermostat to cool down.

a. Lid b. Whisk for milk frothing

c. Whisk for heating the milk d. Maximum filling level mark

e. Minimum filling level mark f. Milk jug

CLEANING AND MAINTENANCE

1.Before washing the appliance, make sure it cooled down and is disconnected from the power socket.

3.Clean jug with a soft cloth and washing-up liquid.

2.Always remove the jug from the power base before cleaning.

4. Press control button (1g) and choose desired program: cappuccino, latte, heating, cold.

- twice - if you want to heat and froth your milk (with whisk 1b) to get the latte froth

2. Filling level indicators

b. MAX level for cold / hot milk frothing:130ml (2b)

a. MAX level for heating milk:300ml (2a)

1.Choose the whisk for the desirable effect. Whisk for milk frothing (1b). If you want your milk frothed. Whisk for heating the milk (1c). If

you want your milk heated.

NOTE: For best results use cold, fresh milk. Non-dairy milk doesn't froth as well as dairy milk. For best effect use “barista” type plant

based milk.

NOTE: Do not exceed the MAX line inside the jug.

3. Put the lid (1a) on the jug and place the jug on the power base (1h). Insert the power plug into an electrical outlet.

g. Control button h. Power base

INSTRUCTIONS FOR USE

2. Pour in a portion of milk (preferably 3.2% fat). The milk should cover the whisk (1b or 1c), and reach minimum level but not exceed the

maximum level mark (1d). Maximum level for milk heating is 300ml (2a) and for milk frothing is 130ml (2b).

- once - if you want to heat and froth your milk (with whisk 1b) to get the cappucino froth

The light above the function will flash 2 seconds and milk frother will start working automatically.

- four times - if you want your milk to keep cold and just froth it (with whisk 1b) for iced coffee or flavoured milk.

5. The appliance will run until a high temperature of milk is reached. Once it's done it will stop automatically.

6. To turn off the appliance before the end of the cycle, press the control button once (1g) during work.

- three times - if you want only to heat your milk (with whisk 1c)

NOTE: DO NOT take off the jug from the power base (h) when it's operating.

NOTE: Milk heats to approximately 65°C. This temperature ensures the best flavor of the coffee.

4.The device should be washed after each use.

IMPORTANT: Do not submerge milk frother into water. The milk frother or any of its accessories are NOT dishwasher safe.

ingredients may pose a threat to the environment. The electrical device should be handed over to limit

Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container

its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.

Worn device should be returned to the appropriate point storage because it is dangerous in the device

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4495 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 7.8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Adler AD 4495 Manual

Product: