Manual Adler AD 4216 (page 4 of 68) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

737936

Zoom out

Zoom in

1/68

18. During mixing of hot products exercise extreme caution to avoid burning.

19.The device has been designed to prepare small amounts of food products. The device is

not intended for industrial food processing.

20. Do not use different type of accessories (e.g. for mixing and whipping) at the same time.

21. Maximum time of continuous operation is 7 minutes. After you operate device for 7

minutes switch it off and allow to cool.

DESCRIPTION OF THE DEVICE (figures 1 and 2 and 3)

1. Top of food processor 2. Tilt button

3. Bowl 4,0 liters 4. Base

5. Bowl cover 6. Speed selector

A – Dough hook B – Mixing beater C – Egg whisk

BEFORE USING MULTIFUNCTION FOOD PROCESSOR

Before assembling the food processor, be sure the power cord unplugged from the power outlet and the speed

selector is on the "0" position.

1.Press the tilt button (2), the top of the mixer (1) will automatically release and lock into the tilt position.

2.Select the desired attachment, which is depending on the mixture to be performed:

A - dough hook for kneading the paste,

B - mixing beater for mixing and beating eggs and butter,

C - egg whisk for beating and frothing the egg white / cream / liquid food.

3.Insert the desired attachment directly, until it lock into correct position – see figures 4 and 5.

Note: Ensure the attachment is fully inserted into the socket, otherwise your mixing result may be affected.

4.Place the bowl (3) on the base (4), then turn the bowl (3) in clockwise until it locks.

5.To lower the top of food processor (1), press the tilt button (2) and push by one hand the top of food processor

(1) down. A click sound will be heard when the head has reached the correct position. Make sure the bow cover

(5) is fixed in place (see figure 1).

FOOD PROCESSOR USING

1. Ensure that the speed selector is at the OFF position, then insert the plug in the power source.

2. Turn the speed selector (6) to your desired speed setting from “0” that means OFF position till “6” means the

fastest speed.

Attachment A: suitable for speeds 1-3. Time of operation: at speed 1 and 2 is 30 second, at speed 3 is 3-5

minutes.

Attachment B: suitable for speeds 3-4. Time of operation: 5-7 minutes.

Attachment C: suitable for speed 5-6. Tune of operation: 5-7 minutes. To whip the egg whites, use a minimum of 3

eggs, a maximum of 12 eggs.

Warning: Do not put knife, metal spoons, fork, spatula and so on into the bowl when it is operating.

3.The max operation time in one cycle shall not exceed 7 minutes and 40 minutes minimum rest time must be

maintained between 2 consecutive cycles.

4.When mixing is completed, turn the speed selector to “0” position, unplug the cord from power outlet.

5.Hold down the tilt button (2), the top of the mixer (1) will automatically lift and lock into the tilt position.

6.If necessary, you can scrape the excess food from an attachment by plastic spatula.

7.Pull out the mixing attachment with a little force by turning to the left side and then down. The speed selector

must be at “0” position and the power outlet must be unplugged before pulling out the mixing attachment.

The food processor will automatically switch off after the locked-rotor motor stop working for 15 seconds. The

device can’t continually work for a long time, if work more than 7 minutes, please wait for 40 minutes before the

next mixing.

CLEANING AND MAINTENANCE

1.Unplug the device from the power and let it cools down before cleaning.

2.Remove the accessories before cleaning them in water with washing-up liquid. Do not wash in dishwashers.

3.Wipe the external parts with kitchen towel or soft cloth.

4.Do not use abrasive materials to clean the device.

5.Don't immerse the base in water or other liquids.

TECHNICAL DATA

Power supply: 220-240V ~50/60Hz

Power: 500W Max Power: 1000W

Max operation time in one cycle: 7 minutes.

Minimum rest time between cycles: 40 minutes.

Device is made in class II of insulation. Device is compliant with EU

directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste

bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may

effect the environment. Do not dispose this appliance in the common waste bin.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4216 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Adler AD 4216 Manual

Product: