799915
4
Zoom out
Zoom in
Previous page
1/80
Next page
4
C. Cover D. Bowl
21. Do not use the appliance to crush ice, bones or other hard products.
DESCRIPTION OF THE DEVICE
17. For safety reasons, only original accessories and spare parts should be used.
24. To clean the housing, do not use aggressive detergents, as they may remove the
applied graphic informational symbols such as: scales, markings, warning signs, etc.
25. THE MAXIMUM CONTINUOUS WORKING TIME OF THE CHOPPER IS 15 sec.
After 15 sec. continuous operation, wait 2 minutes before restarting it.
23. The appliance is not suitable for whipping eggs and kneading dough.
29. Always disconnect chopper from the power supply when it is left unattended and
before assembling, disassembling or cleaning.
15.Do not put your fingers or any other objects into the cup when the device is turned on.
A1. A2. On / off pulse buttons B. Motor unit
18. When removing accessories, handle the blades very carefully: they may injure.
19. Changes to the accessories may only be made when the device is switched off.
Before change disconnect device from the power supply.
26. If the blades become jammed, always unplug the power cord from the electrical outlet
before removing the blockage.
Contact professional electrician in this matter.
16. Make sure that long hair, scarves, ties, etc. do not hang over the cup and working
parts of the device.
20. Do not put anything other than food into the chopper bowl. Do not put hot products
and liquids (over 80°C) into the bowl.
27. Do not move nor lift the device while it is working.
22. Make sure the cover is properly fitted before turning power on the device.
28. Handle the blades carefully to avoid injury. Be careful when handling cutting blades,
when emptying the bowl and during cleaning.
2. Do not operate the device when the bowl is empty.
5. Place the motor unit (B) on the tip of the blades. Move it to fit the cover (C).
Assemble blades if necessary.
USING THE DEVICE:
Remove all protective elements and thoroughly clean the device before the first use.
3. Put ingredients into the bowl (D).
E1. Top set of blades E2. Lower set of blades
1. Do not operate the device continuously for more than 15 seconds, after this time leave it for 2 minutes to cool.
BEFORE FIRST USE
1. Place the bowl (D) on a flat and stable surface.
3. Do not pour hot liquids (over 80°C) into the bowl.
Place top set of blades (E1) on the shaft of the lower set of blades (E2).
Carefully move top set of blades (E1) clockwise until you hear “click” sound. To disassemble move top part (E1) anti-clockwise.
HOW TO ASSEMLBE BLADES
2. Place the blades (E1 and E2) on the guide pin in the bowl (D). Carefully push down the blades all the way down. Hold down and
spin to check if they are mounted correctly.
IMPORTANT NOTES:
4. Place the cover (C) on the bowl.
ATTENTION: Blades are sharp!
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 4082 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4082 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 6.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info