799914

Adler AD 4081 Manual

4
Zoom out
Zoom in
Previous page
1/64
Next page
4
used because that may cause fire, electrical shock or injury.
16. Do not use the appliance for other than its intended use. The blades are very sharp!
Care is needed when handling them
DESCRIPTION OF THE DEVICE (Fig.1 and 4)
22. When changing accessories, be sure that device is NOT connected to electricity.
1a Cup lid 1b Cup bottom
1. Ensure that all blender elements are clean.
6. To start the blender, turn the cup (1c) to the right and turn on the button. Do not use the blender for longer than 50 seconds continuous
operation time.
7. Remove the power cord from the power socket.
2. Keep the cooler stick in the freezer until the water freezes.
4. Place the cup (1c) with the attached cutting blades (1d) on the engine unit (1e). Please note the position of the switch indicator (4f).
1. Fill the cooler stick with water up to the maximum level indicator (6g2).
18. Keep fingers away from moving parts.
3. Once the water in the cooling attachment freezes place it into the bottle and
6g Cooling attachment
6. Remove the cup (1c) from the engine unit (1e).
close the lid.
19. Do not cover vents.
USING THE DEVICE
24. Before first use, clean the device.
20. Do not use with wet hands.
2. Place the ingredients in the cup (1c). All the ingredients must be filled below max level marked on the bottle (Fig.2).
1e Engine unit 4f Switch indicator
5. Connect the power cord to a power socket.
USING THE COOLING ATTACHMENT (Fig.6)
3. Attach the blender cutting blades (1d) to the blade cup (1c) by screwing them onto the cup (Fig.3).
23. Short-time operating: Use the appliance for no longer than 50 seconds and leave it
cooled down completely before using again about 4 minutes.
25. When cleaning device, do not use aggressive detergent, it may damage the cover of
the device.
1c Cup 1d Blender cutting blades
17. Never blend hot oil or fat.
21. Never blend bones, ice, coffee or peanuts.
CLEANING AND MAINTENANCE
Clean the blender cup and cutting blades using water with dishwashing liquid after every use.
The engine unit must not be cleaned under running water or immersed in water.
Power supply: 220-240V~ 50/60Hz
TECHNICAL DATA
Power max.: 800W
Power: 500W
NOTE: The bottle and the bottle lid are dishwasher safe.
Worn device should be returned to the appropriate point storage because it is dangerous in the device
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 4081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4081 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info