799913

Adler AD 4078 Manual

4
Zoom out
Zoom in
Previous page
1/80
Next page
4
17. Watch out for long hair, scarves, neckties hanging above the cup and operating
components of device.
27. If the blades are blocked, always disconnect the power cable plug from the power
socket before removing the blocking elements in the blender cup.
28. Do not move the appliance during operation.
1G - 3 programs: smoothie, ice crush, pulse 1H – blender body
16. In order to avoid injuries handle the blades carefully.
1A – cover 1B – jar lid 1C – blender jar
DEVICE OPERATION
21. Do not put any products other than food and liquids in the blender cup. Do not put hot
products in the cup.
23. Don't use aggressive detergents to clean the housing, as it may remove the
informational graphic symbols such as: scale, signs, safety marks, etc.
Before first use:
1. Remove all stickers from the housing, cup and cover of the blender.
19. Handle the blades with extreme care while disassembling accessories. The blades can
cause cuts.
2. Wash the device according to part CLEANING AND MAINTENANCE.
1D – blade 1E – drainage system 1F – speed adjustment knob
24. Do not start the empty mixing cup, without product inside.
DEVICE DESCRIPTION
18. For safety reasons use only original accessories and spare parts intended for particular
blender type, available at authorized service center.
22. The device is not suitable for whipping egg whites or kneading dough.
25. MAXIMUM PERIOD OF CONTINUOUS BLENDER OPERATION IS 3 MINUTES. After
3 minutes of continuous operation stop the device and wait couple of minutes before
restarting.
20. Change the accessories only when the device is switched off. Disconnect the device
from the power.
26. Do not pour hot liquids (above 60 degrees Celsius) into the food processor.
3. Place the blender jar (1C) on the body (1H). Blender jar doesn’t have a position a lock. You can place it in any position on the blender
body (1H) that you want.
5. Connect the power plug to the power outlet.
When processing different foods, you can use the rotating speed adjustment knob (1F) to choose first or second speed. Blender has
overheat protection, the unit can stop automatically after working for 2 minutes continuously.
2. Make sure the speed adjustment knob (1F) is set to the OFF position.
ICE CRUSH - if you want to crush ice, please rotate the speed adjustment knob to “ON” and press “ICE CRUSH” button. Blender will
6. Turn the blender on by moving speed adjustment knob (1F) to ON position. Program and knob lights will start flashing.
BLENDING WITH ADJUSTED SPEED
1. Put the blender main body (1H) on stable, level surface.
Blender operation:
SMOOTHIE - if you want to stir, please rotate the speed adjustment knob to ON and press “SMOOTHIE” button. Blender will work for 3
seconds then stop for 1.5 seconds, after working for 3 cycles, it will keep working for 45 seconds then will stop automatically.
4. Remove cover (1B) from the blender cup (1C), put in the ingredients to be mixed. In order to avoid overflow, the level of ingredients in
the jar should not exceed marked level on the jar.
BLENDING WITH PROGRAMS
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 4078 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 4078 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info