799628
6
Zoom out
Zoom in
Previous page
1/100
Next page
6
14. When finished, disconnect the grill from the power source and allow it to cool.
13. Before adding the next batch of food to be grilled, close the top housing so that the heating plates reach the set temperature.
1. Place the grill on a clean, flat surface.
2. Clean the housing with a damp and then dry cloth (or a paper towel).
7. To set the time after which the device will turn off, set the time by pressing the button (9i). The display (9h) will show the set time, after
which the device will turn off with 5 beeps. The device can be turned off beforehand by pressing the (9a) ON / OFF button.
2. Place the fat trey (7) in the designated place (5).
3. To unfold the grill, slide the lock clamp (6) to position (6c) 180˚ (Fig. 1)
3. To clean the heating plates, remove them from the housing by pressing the buttons (8).
Table grill function - grilling food on one side.
4. Unfold the top and bottom heating plates to create one large grill surface.
8. Fully open the top housing by grasping the handle (1) and evenly distributing the food on the heating plate.
The device will go into standby mode.
5. To start the lower heating plate, press the knob (9b), then set the desired temperature by turning the knob to the right to increase the
temperature (max. 230 C˚), or to the left to reduce the temperature (min. 60 C˚). The display (9d) will show the set temperature. The
temperature on the display will flash 5 times and the device will start warming up. The thermostat indicator light for the upper heating
plate (9f) will turn red to indicate that the heating plate is heating up, and the green light indicates that the heating plate has reached the
set temperature.
12. Open the top housing and remove the food on the grill with a plastic spatula.
5. Grill the food on one side, then transfer it to the other side.
CLEANING AND MAINTENANCE
1. Before cleaning the grill, make sure it is cool to the touch and unplugged from the power source.
Clean the plates with oven cleaner or in the dishwasher.
4. Do not immerse in water.
display (9e) "---"
After cleaning, wipe the cleaned plates dry and reinstall in the device.
CAUTION: Do not use metal cutlery or sharp kitchen tools as they can damage the heating plates.
6. Wait for about 10 minutes. After this time, the device should reach the required temperature and the thermostat indicator lights (9f)
and (9g) will turn green.
9. Grasp the top housing handle (1) on the grill and close it.
11. During grilling, the indicator lights of the thermostats (9f and 9g) will change from red to green, which means that the thermostats
work cyclically, maintaining the right temperature of the heating plates.
The device is equipped with a height adjustment of the top housing (6a), which can be set to one of five positions by moving the locking
clip (6) (Fig. 2).
10. The grilling time takes from several to several minutes and depends on the type of food used for grilling and the temperature level.
Proceed in the same way using the knob (9c) for the upper heating plate.
Maximum power: 3000W
TECHNICAL DATA:
Power source: 220-240V ~ 50 / 60Hz
Nominal power: 2000W
5. Store with the top housing closed and locked by moving the lock clamp (6) to position (6b).
1. Make sure both heating plates are clean. If necessary, wipe the grill with a damp cloth.
Contact grill function - grilling food on both sides at once.
3. Place the fat tray (7) in the place intended for this (5).
4. Press the (9a) ON / OFF button, and the display will read:
display (9d) "---"
2. Place the grill on a dry, flat surface and connect to a power source. The power indicator light (9a) will flash and the grill will emit a
short sound 'be'.
display (9h) "00"
To protect your environment: please separate carton boxes and plastic bags and
dispose them in corresponding waste bins. Used appliance should be delivered to
the dedicated collecting points due to hazarsous components, which may effect the
environment. Do not dispose this appliance in the common waste bin.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 3059 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 3059 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info