799612

Adler AD 2940 Manual

5
Zoom out
Zoom in
Previous page
1/80
Next page
5
immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20. Do not leave the unit on to the wall outlet or power supply unit unattended.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
22. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
23. The device is designed only for cutting natural human hair.
24. The cutting blades are very sharp. Be careful during assembly, disassembly and
cleaning. Do not touch the blades moving parts during operation!
25. Do not wash the blades in water.
26. Change the attachments only when the unit is turned off.
27. Use only original accessories.
28. To remove hair from inside the machine, use only the included brush.
29. Do not use the device in the bath.
30. Do not use the device on people who are sleeping.
31. During operation, do not place the device on wet surfaces or clothes.
32. The device is not designed to work with external schedulers or separate remote control
system.
33. Do not insert the trimmer into the nose or ear to a depth greater than 5 mm as this may
cause damage to the nasal mucous membrane or eardrum.
DESCRIPTION OF THE DEVICE
1. Device 2. PU box 3. Face shaver head 4. Hair shaver head 5. Nose trimmer head 6. Hair shaver adjustable comb
7. Face shaver cover
Before first use:
1. Remove all packing material and foils from the device
2. Press the On / Off button on the device.
3. Check the percentage of the battery charge.
4. If it is not 100% charge the device.
Charging:
1. Insert the charging cable into the USB C port on the bottom side of the device. (picture 8)
2. Insert the other end of the charging cable into the charging adaptor.
3. Insert the charging adaptor into the wall socket.
4. The Display will turn on and show the current charge percentage. Then it will disappear and the charging icon will begin to blink on and
off.
5. Once the charging is complete unplug the adaptor from the wall socket and then the charging cable from the device.
Using the device:
1. First choose the needed shaver head.
2. Pull on the currently inserted head upwards. It will pop out.
3. Take the new head and match the bump at the base of the head with the notch on the shaver head. (9, 10, 11)
4. Push the new head into the shaver socket. (9, 10, 11)
5. Press the On / Off button once to turn on the device.
6. After you are done using the device turn it off by pressing the On / Off button once.
Travel lock:
1. Press and hold the ON / Off button for 3 seconds.
2. The device is now in travel lock mode and will not turn on single pressing the On / Off button.
3. To unlock the device press and hold the ON / OFF button for 3 seconds.
4. The device now works normally.
Changing the length on the adjustable comb:
1. On the back of the hair shaver comb there is a small lever labeled 3, 4, 5, 6, 7.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 2940 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 2940 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info