799591

Adler AD 2324 Manual

4
Zoom out
Zoom in
Previous page
1/72
Next page
4
25. Do not cover the appliance, it might cause the accumulation of heat in its interior and it
may cause damage or fire.
27. Do not use the device on people who are sleeping.
20. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
26. Hairsprays contain flammable materials. Do not apply them while using the device.
28. During operation, do not put the device on a wet surface or on a surface that is sensitive
to heat and high temperatures.
29. After use, turn off and unplug the unit. Wait until the device cools down before storing.
30. The heating elements reach high temperatures during operation. Do not touch hot parts
of the device with bare hands and do not allow it to come into contact with the scalp, as this
may cause burns.
31. The device is not intended to be operated with external timers or a separate remote
control system.
23. Do not remove dust or foreign bodies from the inside of the device using sharp objects.
DESCRIPTION OF THE DEVICE
1. On/Off/temperature indicator (diodes) 2. Handle 3. Ceramic coated bristles
18. Do not leave device unattended when plugged in.
16. Do not touch the device with wet hands.
because water proximity presents risk, even if the device is turned off.
15. Do not allow the device to wet. If the device falls into water, immediately remove the
power plug from the power socket. If the device is powered, do not put hands in the water.
Have the device checked by the qualified electrician before using it again.
19. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
17. The device has to be turned off after every use.
21. Do not wrap electric cable around the device.
22. Do not use the appliance in the bath.
24. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
NOTE: The unit is hot during operation. Avoid touching your hands or scalp with the hot bristles.
To achieve the best results in hair straightening, use a device on washed, brushed and dry hair.
4. Wait 1-2 minutes to allow the appliance to reach its working temperature. Diodes will stop flashing once device is ready to use.
NOTE: Use lower temperatures for fine, bleached or damaged hair, medium temperatures for normal hair, and higher temperatures for
thick hair.
6. Cool touch tip 7. Swivel cord
3. Turn on the device by pressing and holding power button (4) for 2 seconds. Diode (1) will flash. Adjust desired temperature by pressing
temperature adjustment buttons + / - (5). Temperatures are: 130°C, 150°C, 170°C, 190°C, 210°C.
6. Then put it between the bristles (3).
2. Insert the plug into the power socket.
USING THE DEVICE
8. Once you finish, press on/off button (4) for 2 seconds to turn the hair brush off. Then unplug the power cord from the outlet. Let it cool
7. Move slowly in the direction from the roots to the tips of hair. Repeat until hair is straightened.
1. Before starting the electrical wire should be fully unrolled.
4. On/Off power button 5. Temperature adjustment buttons
5. Starting from the top of the head choose a small strand of hair, straighten it and comb.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 2324 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 2324 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 5.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info