799469
5
Zoom out
Zoom in
Previous page
1/88
Next page
5
2. Store brush (6), sponge (7) and rolling massager (8) head up to dry.
CLEANING
1. Clean the attachments thoroughly with water after each use. Use the warm water (max. 60C°).
- rolling massager - for the application of regenerative creams and to stimulate collagen
production.
- face sponge - for make-up removing and general cleaning.
- facial brush – medium hardness - for deep pore cleansing and exfoliation. Prepares skin for
better absorption of creams, serums and moisturizers.
WARNING: Use the product with caution if the skin is delicate and/or you have already
experienced problems with skin irritation or swelling. Note that the skin around the eyes and on
the lips is thinner and more sensitive, do not use device on this area.
INSTALLING THE ATTACHMENTS
To exchange the head, pull it from the connection pin. Attach the new head by pushing it onto the
connection pin until it locks into the position with a click. Turn off the device before changing the
attachments.
Attachments:
TECHNICAL DATA
Waterproof: IPX 7
Power supply: batteries: 2x 1.5V (AAA)
NOTE: Replace the attachment every 3 to 6 months for good cleaning results.
NOTE: Don’t overdo the cleaning procedure.
depending on the sensitivity of your skin.
7. Switch off the device by moving the switch (2) down.
8. Place the protection cap (5) after use.
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags
(PE) into the plastic container. Worn device should be returned to the appropriate
point storage because it is dangerous in the device ingredients may pose a threat to
the environment. The electrical device should be handed over to limit its reuse and
use. If in the device there are batteries you have to take out and give to the point
stored separately.
(DE) DEUTSCH
Die Garantiebedingungen sind abweichend, wenn das Gerät
gewerblich genutzt wird.
ALLGEMEINE SICHERHEITSBEDINGUNGEN
WICHTIGE HINWEISE ZUR GEBRAUCHSICHERHEIT BITTE
SORGFÄLTIG LESEN UND AUFBEWAHREN
FÜR ZUKÜNFTIGE REFERENZ
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 2178 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 2178 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info