799462

Adler AD 2114 Manual

4
Zoom out
Zoom in
Previous page
1/76
Next page
4
18. Do not leave device unattended when plugged in.
19. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
21. Do not wrap electric cable around the device.
22. Do not use the appliance in the bath.
20. The power cord should not touch hot parts of the device and should not be located
near other heat sources.
23. Do not remove dust or foreign bodies from the inside of the device using sharp
objects.
socket, because water proximity presents risk, even if the device is turned off.
15. Do not allow the device to wet. If the device falls into water, immediately remove the
power plug from the power socket. If the device is powered, do not put hands in the
water. Have the device checked by the qualified electrician before using it again.
16. Do not touch the device with wet hands.
17. The device has to be turned off after every use.
26. Hairsprays contain flammable materials. Do not apply them while using the device.
30. The heating elements reach high temperatures during operation. Do not touch hot
parts of the device with bare hands and do not allow it to come into contact with the
scalp, as this may cause burns.
31. The device is not intended to be operated with external timers or a separate remote
control system.
1. On/off power button 2. Temperature adjustment +/- (100°C... 180°C... 210°C)
28. During operation, do not put the device on a wet surface or on a surface that is
sensitive to heat and high temperatures.
29. After use, turn off and unplug the unit. Wait until the device cools down before storing.
2. Insert the plug into the power socket. LCD temperature display will turn on and show “OFF” sign.
3. Press the On/Off power button (1) until curling iron shows “180°C” and starts heating up to this value.
27. Do not use the device on people who are sleeping.
3. Display 4. Ceramic coated barrel
USING THE DEVICE
24. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
7. Stand 8. Cool tip
5. Clamp 6. Lever
25. Do not cover the appliance, it might cause the accumulation of heat in its interior and
it may cause damage or fire.
To achieve the best results in hair curling, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to use
the correct temperature setting for your hair type.
1. Before starting power cord should be fully unrolled.
4. Adjust the temperature using temperature adjustment buttons +/- (2). During heat up time, the LCD temperature display (3) will start
flashing until the desired temperature is reached. Display will stop flashing when the curling iron is ready to use.
6. Open the clamp (5) using the lever (6). Place the strand of hair so that the hair ends protrude slightly beyond the clamp. Close the
clamp (5).
5. Start with separating a strand of hair.
DESCRIPTION OF THE DEVICE
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 2114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 2114 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 7.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info