799449

Adler AD 1285 Manual

4
Zoom out
Zoom in
Previous page
1/84
Next page
4. Handle 5. Base 6. Mesh filter
7. Power button ON/OFF 8. Temperature control button
BEFORE FIRST USE
SINGLE WATER BOILING UP TO 100 ℃
1. Lid 2. LCD display 3. Housing
22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.
24. Never use kettle without filter or with open cover (automatic shutdown will not work).
29. Children aged 3 to 8 years old can enable and disable the device only when it is in its
normal position of use, they are supervised or instructed on the safe use and understand
the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean
or maintain.
9. Control lamp 10. Keep warm function indicator
Fill the kettle three times with water to the maximum level, boil and pour it. To remove any factory odor.
27. The device is not designed to work with external schedulers or separate remote
control system.
25. Descale your kettle regularly. Using kettle with heating element covered by scale may
cause damage.
1. Fill the kettle with water so that the water level is between the maximum and minimum levels on the water level indicator.
2. Place the base (5) on a stable, flat and heat-resistant surface.
3. Remember to close the kettle with the lid (1) after filling, otherwise the kettle will not switch off automatically when the water boils.
5. Press the power button (7), the display (2) will blink twice, indicating 100 ℃, then the heater will start heating the water, and the LCD
display (2) will show the current water temperature. The water temperature will rise until it boils, i.e. up to 100°C.
6. After the water boils, the kettle will automatically turn off, you will hear the "di-di" sound.
lid. Do not open the lid during boiling in kettle or immediately after boiling, because steam
coming out of lid can cause burns.
23. Never switch on kettle without water.
26. Do not use aggressive detergents to wash the kettle housing - they can damage the
kettle or remove the markings.
DESCRIPTION OF THE DEVICE. ELECTRIC KETTLE AD1285
BASIC OPERATION:
21. Move the kettle only by holding it by handle..
28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
4. Insert the power plug into the 220-240V ~ 50 / 60Hz power socket. Place the kettle on the base (5), you hear the "di" sound.
7. To turn off the kettle before the water finish boiling, lift it off the base (5) or press the power button (7)
CLEANING AND MAINTENANCE
KEEP WARM FUNCTION AT THE SELECTED TEMPERATURE 40 ℃ OR 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃ / 100 ℃
Note: Only during this procedure, the keep warm function will be active. After removing the kettle from the base, the keep warm
function settings will be reset.
Put the kettle on the base (5), wait until you hear the “di" sound. Press the temperature control button (8), the display (2) will show the
temperature you choose 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃) after that press the power button(7) to confirm the
temperature, the LCD display blinks three times remembering the setting of the selected temperature level. Then the display will show
the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the selected temperature level of 40
℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), , you will hear the "di-di" sound.
The device is equipped with an automatic fuse against overheating, the fuse will trip when the kettle was used with insufficient water.
Always make sure that the volume of water in the appliance is above the minimum level. If the fuse turns on, turn off the kettle by
pressing the power button (7), then remove the plug from the power socket and allow the kettle to cool for 5-10 minutes. Then fill the
kettle with water and turn on the device that will operate normally.
Put the kettle on the base (5), wait until you hear the "di" sound. Press the temperature control button (8) FOR 2 SECONDS until the
icon (10) appears on the display (2). Press the temperature control button (8) until the display (2) will show the temperature you choose
40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃) and blink three times remembering the setting of the selected temperature level, then
press the power button (7). The display will show the current water temperature inside the kettle. The kettle will stop boiling water when
it reaches the selected temperature level of 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), you will hear a single "di" sound, the
control lamp (9) will turn and will blink for 2 hours. Within 2 hours, the kettle will heat the water cyclically, constantly displaying the
selected temperature level to maintain. When the water temperature drops by 5 ℃ in relation to the selected temperature level of 40
℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), the device will turn on automatically and heat it.
PROTECTION DEVICES
ADVANCED OPERATION:
8. You can start the kettle again after approximately 2 minutes from the last use.
SINGLE WATER BOILING TO THE SELECTED TEMPERATURE 40 ℃ OR 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃
9. When the device is not in use, the display (2) turn off lighting after 5 minutes.
4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 1285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 1285 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info