785319
15
Zoom out
Zoom in
Previous page
1/42
Next page
M112800-160118-Rev001-UM-de-e-es-fr-nl
15
tray surface. The tare function is operated as follow: Place the object on the tray surface and press the
TARE button. The additional weight will be subtracted and 0.00 will be shown on the display. A baby
can now be placed on the scale surface and the net weight will appear on the display. The maximum
tare weight must not exceed 500g.
Unit switch function
Press the ON/OFF button twice during the function test. By pressing again the ON/OFF button you
can select the requested units kg or lbs. The kg or lb OZ symbol will appear in the display to indicate
the chosen weighing unit.
Recall of memorized weight
Start the scale via the ON/OFF button and the last measured weight will be displayed for approx.
3 sec. in order to determined weight changes of the infant.
Cleaning & maintenance
Cleaning instructions
Clean your scale with a soft moist towel or conventional disinfectant only. Do not use any aggressive
cleaning solutions.
Warning signals and error messages
3. Why does the display read ‘lo’?
Low battery. Replace the batteries.
4. The message displays 0-Ld
Overload warning; remove the weight immediately; otherwise, permanent damage to the scale will
occur.
Safety instructions
The scale should never get wet. Since this can damage the electronics.
Waste disposal
Electronic devices are not domestic waste.
If the scale is out of use the responsible waste disposal association will be glad to
advise you on the measures necessary to dispose of it properly.
Do not throw used batteries into domestic waste. Please inform yourselves at the
responsible waste disposal association how to dispose used batteries.
Storage and transport
Keep all original parts and pieces for an eventual sending back of the scale in order to avoid any
possible damage during transport which automatically leads to no warranty.
Disconnect all cables before transport to avoid unnecessary damages.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade M112800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade M112800 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info