Manual Ade KE 1138 Mara (page 4 of 12) (English, German, Dutch, French, Italian, Spanish)

642015

Zoom out

Zoom in

1/12

Thank you for purchasing this high-quality product made by ADE. You have acquired a

set of scales that meet the highest technical standards and are of proven quality.

Please read these operating instructions carefully before using the product for the first

time and keep them in a safe place where you can find them whenever you need the

information contained in the instructions.

1. Putting into Service

Inserting the batteries:

Open the lid of the battery compartment on the bottom of the scales and insert the three

supplied 1.5 V AAA batteries. Please observe the correct polarity of the batteries (+/-).

Safety information:

Ensure that no objects fall onto the scales; otherwise, the scales

may be damaged.

Only use a damp cloth to clean the scales. Never use solvents

or abrasive cleaners. Do not put the scales under water. You

must clean all the plastic parts of the scales immediately after

they come into contact with grease, spices, vinegar or any other

strongly spiced or coloured foods. Avoid any contact with citric

acid.

2. Operation

Switching on the scales:

Place the scales on a firm, level base. The scales are equipped with highly sensitive

touch buttons. To switch-on the scales touch the /Tare-button. After the scales have

stabilised, they display "0 g" / “0.0 oz” / “0 ml“ or “0.0 fl.oz“, depending on the setting.

The scales are now ready to weigh.

Note: Display the scales a value after power-on, touch the /Tare-button to set the

scales back to “0 g”.

Units of weight:

Turning the knob (in weighing mode) allows you to change country-specific units of

weight (g = grams / oz = ounces / ml = millilitres / fl.oz = fluid ounces). Please ensure

that the scales are set to the appropriate units of weight for you.

Tare func tion:

Touching the /Tare-button allows you to set the scales to "0 g". Place a bowl, for

example, on the platform of the scales, touch the /Tare-button and in this way set the

scales back to "0 g" (is the weight to be tared heavier than 600 g appears bottom left of

the display the TARE-icon). You can repeat this procedure as often as you like until the

total capacity of the scales (5 kg) has been reached. After you remove the item(s) to be

weighed, the total weight is displayed as a minus value.

Automatic- / manua l switch-off the scale:

If the indicated weight does not change within approx. 10 seconds, the backlight of the

scale switches-off automatically. If the indicated weight does not change within approx.

50 seconds, the scales will automatically switch-off. You can switch-off the scales

manually after you have finished using them by touching the /Tare-button for

approximately two seconds.

3. Timer

Set-up timer:

Push the knob to switch-on the scales and to enter the timer mode. The display indicates

"Timer 00:00”. When you used the timer-function once before the previous time-input

appears. Pushing the knob for approx. 2 seconds allows you to set the time indicating

back to “00:00”. Now you can turn the knob to set the desired time. By turning up

(clockwise) the seconds; by turning down (counter clockwise) the minutes. After entering

the desired time, push again the knob to confirm the input. The timer runs and after expiry

of time a loud peep-tone sounds for about 60 seconds. Stop the beep by touching the

/Tare-button or push the knob. During expiration, the timer-function can anytime be

stopped and/or required to operate by pushing the knob.

Note: If, within about 10 seconds before the start of the timer, no further action takes

place, the backlight of the scales switches-off automatically and after approx. 20 seconds,

the scales will automatically switch-off.

Switch between timer- and weighing mode:

If the scales are in weighing mode, push the knob to enter the timer mode. The weighing

function is closed.

If the scales are in timer mode, touch the /Tare-button to enter the weighing mode. If

the timer was previously activated, the timer function runs unto the expiry of time,

except the function has been stopped by touching the /Tare-button for approx. 2

seconds and the scales is thereby off.

4. Error Messages

“Lo“ = Indication that the battery is flat – Please replace the batteries with

three 1.5 V type AAA.

“EEEE” = Overload display – The 5 kg maximum capacity of the scales has been

exceeded. Immediately remove the load from the scales; otherwise, the

load cell could be damaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ade KE 1138 Mara in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ade KE 1138 Mara Manual

Product: