Manual Ade BE 1241 Ricarda (page 4 of 12) (English, German, Dutch, French, Italian, Spanish)

641765

Zoom out

Zoom in

1/12

Thank you for purchasing these high-quality bathroom scales.

Please read these Operating Instructions carefully before using the product for the first time, and

keep them in a safe place so that you can consult them again if you need further information.

1. Conditions of use

You should weigh yourself with as little clothes as possible. Make sure to weigh yourself at the same

time of day each time. Since the body is subject to natural fluctuations (e.g. dehydration from sports

or sauna, intake of food and fluids), constant conditions should be ensured when measuring, so as

to receive comparable results.

ADE Germany shall not accept liability for damages or losses caused by the bathroom scales or for

third party claims. This product is solely intended for private use. It is not designed for professional

use in hospitals or medical facilities.

2. First use

Please make sure to check the packaging and device for ant visible damage before using the scales

for the first time. The scales must not be used if any damage is detected. Please contact us

immediately. Our customer service representatives will be happy to help.

Safety guidelines: This device is not to be used by persons (including children) with limited physical,

sensory or mental abilities or who are lacking experience and understanding, unless they are

supervised by persons, who are responsible for their safety or have been instructed in the use of the

scales. It should be ensured that children do not play with the device.

Place the scales on a flat and solid surface (tiles, parquet, etc.).

Incorrect measurements make occur on carpets.

Stand in the centre of the scale surface to prevent tipping.

Attention! There is a danger of slipping if the scales' surface is wet

or if feet are wet.

Ensure that no objects fall onto the scales; falling objects could

break the glass and damage the scales.

Use only a damp cloth to clean the scales. Never use solvents or

abrasive cleaning agents. Do not immerse in water.

Preparation: Open the lids of the battery compartments on the underside of the scales and on the

reverse of the portable display module to insert the supplied batteries (2 x 1.5V AAA). Please

observe the correct polarity of the batteries (+/-).

3. Programming the time on the portable display

Hold the portable display to input the correct time. Press and hold the SET button for about 3

seconds; the hour display will begin to flash. Press the  or  button for the desired hour value and

confirm your selection by pressing SET. The minute display will now begin to flash. Press the 

–

 button for the desired minute value and confirm your selection by pressing SET.

Pressing and holding the  or  button will speed up the number sequence.

4. Weighing function/ BMI display (Body Mass Index)

IMPORTANT! Please remember that the portable display and the scales must be directly

connected while using the scales. There must not be any obstacles between the scales and the

display. The scales function by way of an IR receiver. The maximum distance between scales

and portable display is limited.

The scales are equipped with a Step-On function. Hold the operating device (display time) in your

hand and step onto the scales. Stand still and do not hold on to anything. The display will initially

show 8888, followed by your current weight after a few seconds. Step off the scales. The display will

return to showing the time after a few seconds.

In order for your BMI to be displayed, you must first input and store your memory location (e.g. 01)

and your body height as follows: Press the SET button on the operating device (time display). The

body height setting is displayed (default setting is 165 cm). Press and hold the SET button for 3

seconds, then release. In the display, the memory location (e.g. 01) is now shown in the display.

Press the  or  button to select the desired memory location (01 to 12 / for max. 12 individuals).

Press the button SET. The body height display is shown. Press the  or  button to select your

body height and press SET to confirm. The display now shows – – – –. Step onto the scales. You will

now be shown your weight and your BMI in 3 alternating successions. Your values will be stored.

Should your weight have changed by more than 2kg by the time you weigh yourself the next time,

then the scales will find your memory location automatically and will also recalculate your BMI in

accordance with your stored body height information.

Quick display of weight/ BMI without saving: Press the SET button on the operating device (time

display). The body height display is shown. The body height setting is displayed (default setting is 165

cm). Repeatedly press the SET button, until your previously entered body height is shown and then

wait until – – – – appears. Step onto the scales. You will now be shown your weight and your BMI in 3

alternating successions. Your values will not be stored.

5. Error messages

“Err” = Overload – The 150 kg maximum load capacity has been exceeded. Remove the

load from the scales immediately to avoid damage to the load cells.

"h-Lo" = Batteries in the portable device are low – Please replace with 2 x 1.5V type AAA

batteries.

"b-Lo" = Batteries in the scales are low – Please replace with 2 x 1.5V type AAA batteries.

"C" = Weighing error - For example, if the scales are unstable or you are not standing still

on the weighing platform. Please repeat the weighing process.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ade BE 1241 Ricarda in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ade BE 1241 Ricarda Manual

Product: