Manual Ade BA 915 Marisa (page 8 of 28) (English, German, Dutch, French, Italian, Spanish)

641815

Zoom out

Zoom in

1/28

There is a little switch at the bottom side of the scale for country specific settings with the

option to switch from kg = kilogram to lb = pound or st = stone. Please pay attention to

use the scale under consideration of the country specific unit of weight.

4. Weighing function (weight measurement only)

1. Switch-on the scale by using the tap-on-function. For this, tap with your foot for

about 2 seconds on the centre of the scale. The display indicates the signal “8888“

and a few seconds later “0.0 kg”. Now the scale is ready to use.

2. Step on the centre of the scale. Remain stationary on the weighing platform and do

not hold you tight. After the scale levelled-off the symbol “H” appears and your weight

will be indicated for 10 seconds. Afterwards the scale will switch-off automatically.

Alternatively, direct weighing: Step on the centre of the scale while the scale is switched-

off. The scale switch-on automatically when loaded. At first, the display indicates the

signal “8888“ and after the scale levelled-off your weight will be indicated for 10 seconds.

Afterwards the scale will switch-off automatically.

5. Programming / Enter of personal data

Before first time use your personal data like gender, body height and age must be

programmed and saved under selected locations 01 to 10 (up to 10 persons). The enter

keys are located above the display. To enter your personal data please utilise the

buttons: SET (save button), ◄ (minus button), ► (plus button) and follow the particular

points (numbers quick run-off by pressing the ◄ or ► button for longer than 1 second):

1. Place the scale on a table. Switch-on the scale by using the tap-on-function. For this,

tap with your hand for about 2 seconds on the centre of the scale. The display

indicates the signal “8888“ and a few seconds later “0.0 kg”.

2. Press the SET-key. The indication to select your personal location (e.g. 01) starts to

flash. To select your required location (01 to 10) press the ◄ or ► button. After the

selection of your personal location, press the SET-button to save the reading.

3. After you’ve selected your personal location, the symbol for gender starts to flash. To

select the requested gender (female/male) press the ◄ or ► button. After the

selection of your gender, press the SET-button to save the reading.

4. After you’ve selected your gender (e.g. female), the symbol for body height starts to

flash (default woman 160 cm / man 170 cm). To enter your height, press the ◄ or ►

button. After the selection of your body height, press the SET-button to save the

reading.

5. After you’ve selected your body height (e.g. 166 cm), the symbol for age starts to flash

(default age 30). To enter your age press the ◄ or ► button. After the selection of

your age, press the SET-button to save the reading.

The scale indicates once again your selected personal location. That settles the

completion of input and the scale returns to the indication “0.0 kg”. The scale is ready to

use and you may now start your body analysis. Without further activity the scale

automatically power-off. Your personal data are stored.

If you push the ◄ or ► button within 2 seconds after the first complete input, you can

directly enter the personal data of a further person. Alternatively, you repeat the complete

steps listed below for further entries of personal data.

6. Body Analysis

An analysis is only possible in bare feet. Your personal data must be entered first (please

see page 4-5).

1. Switch-on the scale by using the tap-on-function. For this, tap with your foot for about 2

seconds on the centre of the scale. The display indicates the signal “8888“ and

afterwards “0.0 kg”.

2. Take off your foot from the weighing platform and select your personal location by using

the ◄ or ► button. At first, your personal data will be displayed and shortly after

“0.0 kg“ will be indicated.

3. Now, carefully step in bare feet on both stainless steel electrodes of the scale and

remain stationary. After the scales levelled-off the symbol “H” will appear.

3. At first, your weight will be indicating. Afterwards, while the measurement is taking place

the signal “1-2-3-4” will appear. During this time, remain stationary on the scale.

4. After completion of the measurement your body fat % (F), your body water % (H), and

your muscle mass % ( ) will be shown successively 3 times.

After a few seconds the scale switch-off automatically.

The body fat content is shown as the amount of stored fat as a percentage of total body

weight. There is no generally accepted set value as this varies significantly according to

gender (due to the different build) and age. Body fat is vital for basic body functions. It’s

protecting organs, cushioning joints, regulating body temperature, storing vitamins and

serves the body as energy storage. As essential for women a minimum body fat

proportion between 10% and 13% and for men between 10% and 13% is requested -

with the exception of competitive athletes.

Body fat is not a clear indicator for health. Too high body weight and a too high body fat

proportion are linked to the incidence of many civilization diseases such as diabetes,

cardiovascular diseases, etc. Lack of movement and improper nutrition are often the

prime course for these diseases. There is an obvious direct relationship between

overweight and lack of movement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 915 Marisa in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ade BA 915 Marisa Manual

Product: