641818
8
Zoom out
Zoom in
Previous page
1/72
Next page
There is a little push button next to the battery case at the bottom side of the scale for
country specific settings with the option to switch from kg = kilogram to lb = pound.
Please pay attention to use the scale under consideration of your country specific unit of
weight.
4. Programming / Enter of personal data
Before first time use your personal data like gender (female or male, sports or no sports),
body height and age must be programmed and saved under selected locations P1 – P8
(up to 8 persons). The enter keys are located below the display. To enter your personal
data please utilise the buttons: SET (on and save button), (plus button), (minus
button) and follow the particular points:
1. Press the SET-button. The display indicates a flashing P1” . To select your personal
location (P1 P8), press the
or button. After the selection of your personal
location, press the SET-button to save the reading.
2. After you’ ve selected your personal location (e.g. P3), the symbol for gender starts to
flash. To select the requested gender ( male, female, or
male sports,
female sports), press the
or button. After the selection of your gender, press
the SET-button to save the reading.
3. After you’ ve selected your gender (e.g. female), the symbol for body height starts to
flash (default 165 cm). To enter your height, press the
or button. After the
selection for your height, press the SET-button to save the reading.
4. After you’ ve selected your body height, the symbol for age starts to flash (default 30
age). To enter your age, press the
or button. After the selection of your age,
press the SET-button to save the reading.
After input completion, the display indicates 0.0 kg and a few seconds later, the scale
automatically powers off.
To enter personal data of further persons please repeat the steps listed below.
5. Weighing function (weight measurement only)
1. Switch on the scale by using the step-on-function. Just step on the scale. Remain
stationary on the weighing platform and do not hold you tight. After a few seconds,
your weight will be displayed.
2. Step off the scale after weighing. The scale will switch off automatically after a few
seconds.
3. If you remain on the weighing platform, the analyser scale automatically switches
into the measuring mode and starts the body analysing.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first (please
see page 4).
1. The scale contains a step-on-function and an automatic user recognition. Carefully
step on the stainless steel points (measuring units) of the scale in bare feet and remain
stationary. User recognition: If the scale cannot automatically recognise the user, the
display will indicate the next both most similar memory locations e.g. P1P2” . Please
select your personal memory location (where your personal data are stored) by using
the or key and remain stationary on the scale.
2. At first, your weight will be indicated on the display. Shortly after, while the analysis is
taking place, the signal o” starts to move twice on the display from left to right. After
completion of the measurement, your measured values will be shown as follows:
1. Your body fat in %
2. Your body water in %
3. Your muscle mass in %
4. Your bone mass in kg
Afterwards your measured values (weight, body fat, body water, muscle mass and bone
mass) will be shown in changes successively 3 times.
EXAMPLE:
Weight Measuring process Body Fat Body Water Muscle Mass
When you once used the scale, you will be able to get the readings of your last
measurement. This function allows you to follow the changes between your
measurements. For that press the
or button and choose your personal location. Now
the display indicates in changes successively the measured values of your last
measurement.
The body fat content is shown as the amount of stored fat as a percentage of total body
weight. There is no generally accepted set value as this varies significantly according to
gender (due to the different build) and age. Body fat is vital for basic body functions. It’ s
protecting organs, cushioning joints, regulating body temperature, storing vitamins and
serves the body as energy storage. As essential for women a minimum body fat
proportion between 10% and 13% and for men between 10% and 13% is requested -
with the exception of competitive athletes.
4
5
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 911 Dorothea at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 911 Dorothea in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info