641824

Ade BA 832 Vanessa Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
Adjustment of weight unit:
Place the scale on a table. The scale will automatically switch-on and the LCD display will
indicate “8888” and a few seconds later “0.0 kg“. By pushing or button (located at
the front side of the scale) it is possible to change the unit of weight for country specific
setting (kg = kilogram / st = stone / lb = pound). To confirm the entry push the SET-
button. Please pay attention to use the scale under consideration of your country specific
unit of weight.
4. Weighing function (weight measurement only)
1. Switch on the scale by using the tap-on-function. For this, tap with your foot short
and forceful on the centre of the scale. The display indicates the signal „8888“ and a
few seconds later “0.0” kg. Now the scale is ready to use.
2. Step on the centre of the scale. Remain stationary on the weighing platform and do
not hold you tight. After a few seconds, your weight will be indicated.
3. After weighing, step off the scale. A few seconds later, the scale will automatically
switch-off.
5. Programming / Enter of personal data
Before first time use your personal data like gender (female or male), body height and
age must be programmed and saved under selected locations P1 – P0 (up to 10
persons). The enter keys are located at the front of the scale. To enter your personal data
please utilise the buttons: SET (on and save button), (plus button), (minus button)
and follow the particular points:
1. Place the scale on a table. The scale will automatically switch-on and the LCD
display will indicate “8888” and a few seconds later “0.0 kg“. Now press the SET-
button. The display indicates flashing “P1”. To select your personal location (1 - 10),
press
or button. After the selection of your personal location press the SET-
button to save the reading.
2. After you have selected your personal location (e.g. P2), the symbol for gender starts
to flash. To select the requested gender (male / female), press
or button. After the
selection of your gender press the SET-button to save the reading.
3. After you have selected your gender (e.g. female), the symbol for age starts to flash
(default 25 age). To enter your age, press
or button. After the selection for your
age press the SET-button to save the reading.
4. After you have selected your age, the symbol for body height starts to flash (default
170 cm). To enter your height, press
or button. After the selection of your height
press the SET-button to save the reading.
After input completion, the display indicates “- - -”. Your entered personal data will be
indicated and shortly after “0.0 kg”. A few seconds later, the scale automatically powers-
off.
To enter personal data of further persons please repeat the steps listed below.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first (please
see page 4 - 5).
1. Switch on the scale by using the tap-on-function. For this, tap with your foot short
and forceful on the centre of the scale. The display indicates the signal „8888“ and a
few seconds later “0.0” kg. Now press the SET-button and select your personal
location by using
or button.
2. At first, your personal data (age, body height, and gender) will be indicated and shortly
after the indication, “0.0 kg” will appear on the display.
3. As soon as “0.0 kg” appears in the display the scales is prepared for the
measurement.
4. Carefully step on the stainless steel strips (measurement module) of the scale in bare
feet and remain stationary while the measurement is now taking place.
4. At first, your weight will be indicated on the display. Shortly after, while the analysis
is taking place, the signals “o” starts to move. After completion of the measurement,
your measured values (weight, body fat, body water, muscle mass and bone mass) will
be shown in changes successively 3 times.
EXAMPLE:
Indication: Weight Body Fat Body Water
Muscle Mass Bone Mass
5
4
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 832 Vanessa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 832 Vanessa in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info