641825

Ade BA 831 Britta Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
170
cm
03
There is a little black switch at the bottom side of the scale for country specific settings
with the option to switch from kg = kilogram to lb = pound or st = stone. Please pay
attention to use the scale under consideration of the country specific unit of weight.
4. Weighing function (weight measurement only)
1. Switch on the scale by using the tap-on-function. For this, tap with your foot shortly
on the centre of the scale. The display indicates the signal „ 8888“ and a few
seconds later 0.0 kg. Now the scale is ready to use.
2. Step on the centre of the scale. Remain stationary on the weighing platform and do
not hold you tight. After a few seconds, your weight will be displayed.
3. After weighing, step-off the scale. The scale will switch off automatically after a few
seconds.
5. Programming / Enter of personal data
Before first time use your personal data (gender: female or male, body height, age) must
be programmed and saved under selected locations 01 – 10 (up to 10 persons). The
enter touch keys are located below the display. To enter your personal data please utilise
the buttons:
(minus button), (plus button), SET (save button) and follow the particular points:
1. Place the scale on a table. Switch on the scale by using
the tap-on-function. For this, tap with your hand shortly on
the centre of the scale. The display indicates the signal
„ 8888“ and a few seconds later 0.0 kg. Now touch the
SET-button and the display indicates a flashing “ 01” . To
select your personal location (01– 10), touch the - or -
button. After the selection of your personal location, touch
the SET-button to save the reading.
2. After you selected your personal location (e.g. 03), the
symbol for gender starts to flash. To select the requested
gender (female or male) touch the - or -button. After
the selection of your gender press the SET-button to save
the reading.
3. After you selected your gender (e.g. female), the symbol
for body height starts to flash (default 170 cm). To enter
your height, touch the - or -button. After the selection
for your height, touch the SET-button to save the reading.
4. After you selected your body height, the symbol for age
starts to flash (default Age 30). To enter your age, touch
the - or -button. After the selection of your age, touch
the SET-button to save the reading.
After input completion, the display indicates again successively your entered personal data
until the display shows 0.0 kg. A few seconds later, the scale automatically power-off.
To enter personal data of further persons please repeat the steps listed below.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first (please
see page 4 - 5).
1. Switch on the scale by using the tap-on-function. For this, tap with your foot shortly
on the centre of the scale. The display indicates the signal „ 8888“ and a few seconds
later 0.0 kg. Select your personal location by using the - or -button.
2. At first, your personal data will be displayed (age, body height, and gender). Shortly
after that, „ 0.0 kg“ will be indicated.
3. As soon as the display shows „ 0.0 kg“ , the scale is prepared for the measurement.
4. Carefully step on the scale in bare feet and remain stationary while the measurement is
now taking place.
5. At first, your weight will be indicated on the display. Shortly after, while the analysis
is taking place, the signals 1 – 2 – 3 – 4 starts to move. After completion of the
measurement your weight, your body fat (F), your body water (H) and your muscle
mass ( ) will be shown successively 3 times.
6. After weighing, step-off the scale. The scale switch-off automatically, after a few
seconds.
EXAMPLE:
Weight F = Body Fat H = Body Water = Muscle Mass
4 5
8888
kg
0.0
kg
01
30
Age
71.
2
kg
F
28.6
%
H
45
.
7
%
29
.
8
%
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 831 Britta at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 831 Britta in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info