Manual Ade BA 804 Flora (page 32 of 73) (English, German, Dutch, French, Italian, Spanish)

641842

Zoom out

Zoom in

1/73

5. Programming / Enter of personal data

Before first time use your personal data like gender (female or male, sports or no

sports), body height and age must be programmed and saved under selected

locations 1 – 4 (up to 4 persons). The enter keys are located at the head front of the

scale. To enter your personal data please utilise the buttons: SET (on and save

button), (plus button), (minus button) and follow the particular points:

1. Press the SET-button. The display indicates a

flashing “1”. To select your personal location

(1 - 4) press the 

or  button. After the selection

of your personal location press the SET-button to

save the reading.

2. After you’ve selected your personal location

(e.g. 3) the symbol for gender starts to flash.

To select the requested gender ( male, female,

or male sports,

female sports), press the



or  button. After the selection of your gender

press the SET-button to save the reading.

3. After you’ve selected your gender (e.g. female)

the symbol for body height starts to flash (default

165 cm). To enter your height press the 

or 

button. After the selection for your height press

the SET-button to save the reading.

4. After you’ve selected your body height the symbol

for age starts to flash (default 30 age). To enter

your age press the 

or  button. After the

selection of your age press the SET-button to save

the reading.

After input completion the display indicates “0.0 kg”. After a few seconds the scale

automatically powers off.

To enter personal data of further persons please repeat the steps listed below.

6. Weighing function (weight measurement only)

1. Switch on the scale by using the step-on-function. Just step on the scale. Remain

stationary on the weighing platform and do not hold you tight. After a few seconds

your weight will be displayed.

2. After weighing step off the scale. The scale will switch off automatically after a few

seconds.

7. Body Analysis

An analysis is only possible in bare feet. Your personal data must be entered first

(please see page 4).

1. Press the SET-button and select your personal location by using 

or  button.

2. As soon as “0.0” appears on the display the scales is prepared for the measurement.

3. Carefully step on the stainless steel flags of the scale in bare feet and remain

stationary while the measurement is now taking place.

4. At first your weight will be indicated on the display. Shortly after, while the analysis is

taking place, the signals “o” starts to move. After completion of the measurement

your measured values will be shown as follows:

1. Your body fat % and as subtitle an evaluation: Under fat / Healthy / Over fat /

Obese

2. Your body water %

3. Your muscle mass %

Afterwards your measured values (weight, body fat, body water and muscle mass) will

be shown in changes successively 3 times.

EXAMPLE:

Weight Body Fat Body Water Muscle Mass

When you once used the scale you will be able to get the readings of your last

measurement. This function allows you to follow the changes between your

measurements. For that press the 

or  button and choose your personal location.

Now the display indicates in changes successively the measured values of your last

measurement.

5 4

165

age

165

54.0 kg

24.0%

51.0%

31.5%

fat

TBW MUS

Healthy

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 804 Flora in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ade BA 804 Flora Manual

Product: