641842
8
Zoom out
Zoom in
Previous page
1/73
Next page
4. Programming / Enter of personal data
Before first time use your personal data like gender (female or male, sports or no sports),
body height and age must be programmed and saved under selected locations 1 4 (up
to 4 persons). The enter keys are located at the head front of the scale. To enter your
personal data please utilise the buttons: SET (on and save button), (plus button),
(minus button) and follow the particular points:
1. Press the SET-button. The display indicates a
flashing “ 1” . To select your personal location
(1 - 4) press the
or button. After the selection
of your personal location press the SET-button to
save the reading.
2. After you’ ve selected your personal location
(e.g. 3) the symbol for gender starts to flash.
To select the requested gender ( male, female,
or male sports,
female sports), press the
or button. After the selection of your gender
press the SET-button to save the reading.
3. After you’ ve selected your gender (e.g. female)
the symbol for body height starts to flash (default
165 cm). To enter your height press the
or
button. After the selection for your height press
the SET-button to save the reading.
4. After you’ ve selected your body height the symbol
for age starts to flash (default 30 age). To enter
your age press the
or button. After the
selection of your age press the SET-button to save
the reading.
After input completion, the display indicates 0.0 kg . After a few seconds, the scale
automatically powers off.
To enter personal data of further persons please repeat the steps listed below.
5. Weighing function (weight measurement only)
1. Switch on the scale by using the step-on-function. Just step on the scale. Remain
stationary on the weighing platform and do not hold you tight. After a few seconds
your weight will be displayed.
2. After weighing, step off the scale. The scale will switch off automatically after a few
seconds.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first (please
see page 4).
1. Press the SET-button and select your personal location by using
or button.
2. As soon as “ 0.0” appears on the display the scales is prepared for the measurement.
3. Carefully step on the stainless steel flags of the scale in bare feet and remain stationary,
while the measurement is now taking place.
4. At first, your weight will be indicated on the display. Shortly after, while the analysis is
taking place, the signals “ o” starts to move. After completion of the measurement your
measured values will be shown as follows:
1. Your body fat % and as subtitle an evaluation: Under fat / Healthy / Over fat / Obese.
2. Your body water %
3. Your muscle mass %
Afterwards your measured values (weight, body fat, body water and muscle mass) will be
shown in changes successively 3 times.
EXAMPLE:
Weight Body Fat Body Water Muscle Mass
When you once used the scale, you will be able to get the readings of your last
measurement. This function allows you to follow the changes between your
measurements. For that press the
or button and choose your personal location. Now
the display indicates in changes successively the measured values of your last
measurement.
5
4
165
cm
3
cm
165
3
cm
30
age
3
165
l
54.0 kg
24.0%
51.0%
31.5%
3
3
3
3
f at
T BW MU S
Healthy
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 804 Flora at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 804 Flora in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info