641848
12
Zoom out
Zoom in
Previous page
1/28
Next page
4. Weighing function (weight measurement only)
1. Switch on the scale by using the tap-on-function. For this tap with your foot
shortly on the centre of the scale. The display indicates the signal 888 and a
few seconds later 0.0 kg. Now the scale is ready to use.
2. Step on the centre of the scale. Remain stationary on the weighing platform and
do not hold you tight. After a few seconds your weight will be indicated.
3. After weighing step off the scale. The scale switches off automatically after a few
seconds.
5. Programming / Enter of personal data
Before first-time use your personal data (gender female
or male , body height,
age) must be programmed and saved under selected locations 1 12 (up to 12
persons). The enter keys be located at the head front of the scale. To enter your
personal data please utilise the buttons:
(on button), (minus button), + (plus button), (save button) and follow the
particular points:
1. Press the button
and the display indicates a
flashing 01. To select your personal location
(112), press the button (+) or (). After you
selected the location press the button
to save
the reading.
2. After you selected your personal location (e.g.
personal location 03) the symbol for gender
starts to flash. To select the requested gender
(
for female or for male), press the button
(+) or (). After you selected your gender
press the button
to save the reading.
3. After you selected your gender (e.g. female) the
symbol for body height starts to flash (default
170 cm). To enter your height press the button
(+) or (). After you selected your height press
the button
to save the reading.
4. After you selected your body height the symbol
for age starts to flash (default 30 AGE). To enter
your age press the button (+) or (). After you
selected your age press the button
to save
the reading.
After completion the input you will hear a low tone and a few seconds later the scale
automatically powers off.
To enter personal data of further persons please repeat the steps listed below.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first
(please see page 4 - 5).
1. Switch on the scale by using the tap-on-function. For this tap with your foot a few
seconds on the centre of the scale. The display passes through from 01 to 12 and
back to 01. Take off your foot from the scale when the display indicates the selected
location for your personal data.
2. At the first time measurement the display indicates the signal 888 and a few
seconds later 0.0 kg. When you once used the scale the display indicates 888 not
anymore but the readings of your last measurement. This function allows you to
follow the changes between your measurements.
3. As soon as the display indicates 0.0 the scales is ready for measure.
4. Carefully step onto the scale in bare feet and remain stationary while the
measurement is now taking place.
5. At first your weight will be indicated on the display. Shortly after, while the analysis
is taking place (25 30 seconds), the signal o starts to move. After completion of
the measurement your stored data (gender, body height and age) will be shown
constantly and in changes successively your weight, body fat, body water and
muscle mass.
EXAMPLE:
TBF = Body Fat TBW = Body Water TBM = Muscle Mass
The body fat content is shown as the amount of stored fat as a percentage of total body
weight. There is no generally accepted set value as this varies significantly according to
gender (due to the different build) and age. Body fat is vital for basic body functions. Its
protecting organs, cushioning joints, regulating body temperature, storing vitamins and
serves the body as energy storage. As essential for women a minimum body fat
proportion between 10% and 13% and for men between 10% and 13% is requested -
with exception of competitive athletes.
01
03
170
CM
30
AGE
03
170
CM
30
AGE
03
170
CM
30
AGE
TBF
21.3%
50.1kg
165
CM
30
AGE
TBW
56.6%
50.1kg
165
CM
30
AGE
TBM
37.5%
50.1kg
165
CM
30
AGE
4
5
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 710 Catharina at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 710 Catharina in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info