641849

Ade BA 707 Petra Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
4. Weighing function (weight measurement only)
1. Switch on the scale by using the tap-on-function. For this, tap with your foot shortly on
the centre of the scale. The display indicate the signal “ 8888“ and a few seconds later
“ 0.0 kg” . Now the scale is ready to use.
2. Step on the centre of the scale. Remain stationary on the weighing platform and do
not hold you tight. After a few seconds, your weight will be displayed.
3. After weighing step off the scale. The scale will switch off automatically after a few
seconds.
5. Programming / Enter of personal data
Before first time use your personal data (gender: female or male, body height, age) must
be programmed and saved under selected locations 01 – 10 (up to 10 persons). The
enter keys are located at the head front of the scale. To enter your personal data please
utilise the buttons: (minus button), (plus button), SET (save button) and follow the
particular points:
1. Place the scale on a table. Switch on the scale by using
the tap-on-function. For this, tap with your hand shortly on
the centre of the scale. The display indicate the signal
“ 8888“ and a few seconds later 0.0 kg. Now press the
SET-button and the display indicate a flashing “ 01” . To
select your personal location (01– 10), press the or
button. After the selection of your personal location press
the SET-button to save the reading.
2. After you selected your personal location (e.g. 03) the
symbol for gender starts to flash. To select the requested
gender (female or male), press the or -button. After the
selection of your gender press the SET-button to save the
reading.
3. After you selected your gender (e.g. female) the symbol for
body height starts to flash (default 170 cm). To enter your
heights press the or-button. After the selection for
your height press the SET-button to save the reading.
4. After you selected your body height the symbol for age
starts to flash (default Age 30). To enter your age press the
or -button. After the selection of your age press the
SET-button to save the reading.
After input completion, the display indicates again successively your entered personal data
until the display shows “ 0.0 kg” . A few seconds later, the scale automatically powers off.
To enter personal data of further persons please repeat the steps listed below.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first (please
see page 4 - 5).
1. Switch on the scale by using the tap-on-function. For this, tap with your foot shortly on
the centre of the scale. The display indicates the signal “ 8888“ and a few seconds later
“ 0.0 kg” . Press the SET-button and select your personal location by using the or -
button.
2. At first your personal data will be displayed (age, body height and gender). Shortly after
that “ 0.0 kg“ will be indicated.
3. As soon as the display shows “ 0.0 kg“ the scale is prepared for the measurement.
4. Carefully step on the scale in bare feet and remain stationary while the measurement is
now taking place.
5. At first, your weight will be indicated on the display. Shortly after, while the analysis is
taking place, the signals 1 – 2 – 3 – 4 starts to move. After completion of the
measurement your weight, your body fat (F), your body water (H) and your muscle
mass ( ) will be shown successively 3 times.
6. After weighing step off the scale. The scale switches off automatically after a few
seconds.
EXAMPLE:
Weight F = Body Fat H = Body Water = Muscle Mass
The body fat content shows the amount in percentage of stored fat from the total weight
of a body. There is no generally accepted set value as this varies significantly according to
gender (due to the different build) and age. Body fat is vital for basic body functions. It’ s
protecting organs, cushioning joints, regulating body temperature, storing vitamins and
serves the body as energy storage.
4
5
8888
kg
01
170
30
cm
Age
03
0.0
kg
71.
2
kg
F
28.6
%
H
45
.
7
%
29
.
8
%
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 707 Petra at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 707 Petra in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info