Manual Ade BA 1408 Selina (page 6 of 72) (English, German, Dutch, French, Italian, Spanish)

641788

Zoom out

Zoom in

1/72

Thank you for purchasing these high-quality body analysis scales.

Please read these operating instructions carefully before using the product for the first

time and keep them in a safe place where you can find them whenever you need the

information contained in the instructions.

1 How do the body analysis scales work?

With these new revolutionary scales you will receive information on your body

composition regarding weight, percentage of body fat %, body water %, muscle mass

%, bone mass kg, BMI and the Basal Metabolic Rate (energy requirement) kcal. First of

all the personal data such as gender (male or female), height and age must be stored in

the individual memory location just once. Then weighing is as easy as on any normal

scales. You only need to choose your individual memory button, step onto the scales

and in just a few seconds your current body status will be displayed. A small electrical

current is used to measure the resistance. Water, which is mainly contained in muscles,

is a good conductor, fat on the other hand blocks the current. Taking the measured

resistance and the stored data into consideration, the body analysis scales can very

precisely calculate your body composition.

2 Conditions of use

The measurements should take place without clothes, if possible, and always barefoot.

Since the body is subject to natural fluctuations (e.g. dehydration through sports or

sauna, intake of food and fluids), constant conditions should be ensured when

measuring, so as to receive comparable values.

Care should be taken that the measurements are always carried out at the same time of

day. Directly after getting up in the morning, the water has not yet spread through the

body. This means that the resistance is still relatively high, due to the bad conductivity in

the body. With increasing movements throughout the day, the water spreads through the

body, increasing conductivity, which causes the resistance, and thus the fat level too, to

be shown as lower. To determine the actual changes of body composition, it is therefore

important to measure always at same time. An easy way of doing this is by always

measuring a quarter of an hour after getting up in the morning, either before or after

using the toilet.

Despite the minimum current, persons with cardiac pace makers or other implants,

which emit frequencies, must not use the body ana lysis scales! Other implants, such

as a titanium plate in the knee, pose no danger. Metals, however, conduct electricity

extremely well, which has the effect that body fat values are "beautified", meaning that

the actual fat level is higher than shown by the scales. Tendencies, on the other hand,

can be determined just as well. In women, menstrual factors have an effect on the

measurement results, since hormonal fluctuations influence the body's water balance. If

the body contains all lot of water, the fat values are lower, if less water is contained, the

7 Error Messages

"Err" = Overload – The 180 kg maximum load capacity has been exceeded.

Immediately remove the load from the scales; otherwise, the load cell

could be damaged.

Or: Faulty weighing / measuring process – For example, if the scales

are unstable or you are not standing still on the weighing platform.

"LO" = Batteries are empty – Please replace the batteries with the appropriate

battery type (1.5 V AAA).

"ErL" = Fat percentage % too low – Lower than 5% cannot be displayed.

"ErL" = Fat percentage % too high – Higher than 50% cannot be displayed.

8 Technical Data

Load capacity x graduation: Max. 180 kg x 100 g

Display resolution: Percentage of body fat: 0.1%

Display resolution: Percentage of body water: 0.1%

Display resolution: Percentage of muscle mass: 0.1%

Display resolution: Bone mass 100 g

Pers. memory locations: 10

Age: 10 - 80 years

Height: 100 - 240 cm

Dimensions: approx. 330 mm x 320 mm x 25 mm

Batteries: 4 x 1.5 V AAA (included)

Subject to technical changes

9 Warranty

ADE guarantees to rectify any material or manufacturing defects by way of repair or

replacement free of charge for a period of three years from the purchase date. At the time

of purchase, please get the retailer to fill in and stamp the guarantee card. In the case of

guarantee claims, please return the scales to your retailer including guarantee card and

stating the reasons for the claim.

CE conformity. This device is interference-suppressed in

accordance with the applicable EU Directive 2004/108/EC

Note: Extreme electromagnetic influences, e.g. when operating radio communication

equipment next to the scales, can affect the displayed value. Once the interference has

been eliminated, the product will return to normal function. A resetting of the device may

be necessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 1408 Selina in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ade BA 1408 Selina Manual

Product: