641800

Ade BA 1210 Jette Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
Preparation: Open the battery compartment cover on the underside of the scales and
remove the battery safety strip. Please check for correct polarity of the batteries (+/-).
On the underside of the scales, a small push button "UNIT" is provided, which will allow
country specific settings (kg = kilogram / lb = pound). Please ensure that the scales are
configured to show the unit of weight that you normally use.
4. Weighing function (only weight measuring)
Simply step onto the scales. Stand still, do not hold on to anything. Your weight will be
displayed as soon as the scales have stabilised.
5. Programming / Entering personal data
Enter and store your personal data (female or male, athletic or non-athletic, body height,
age) in one of the memory locations P1 – P8 (for up to 8 individuals) before using the
scales for the first time. The input buttons are located below the display. To enter your
personal data, touch the buttons: SET (memory button), ◄ (minus button), ► (plus
button), and complete the individual steps (quick number cycle when touching and
holding the button for more than 1 second):
1. Touch the SET button. The memory location selection display (e.g. P1) will flash.
Touch the ◄ or ► button to select the desired memory location (P1 to P8), and save
by touching the SET button.
2. After you have selected the memory location (e.g. memory location P3), the gender
icon flashes. Press the ◄ or ► button to select the correct gender ( male,
female, male athletic or female athletic ), then save by pressing the
SET button.
3. Once you have selected your gender and athletic status, the body height display will
begin to flash (default setting 160 cm). Touch the ◄ or ► button to enter your body
height, and save by pressing the SET button.
4. After you have entered your body height (e.g. 166 cm), the age display will start
flashing (default setting 30). Touch the ◄ or ► button to enter your age, and save by
pressing the SET button.
6. Body analysis
An analysis is only possible with bare feet. The personal data must be entered
beforehand (see page 4).
1. For your first analysis, select your personal memory location via the SET button.
Carefully place your bare feet on the stainless steel strips on the scales as soon as
0.0 is displayed, and stand still.
2. For any subsequent measurement, simply step onto the scales, carefully placing your
bare feet on the stainless steel strips of the scales. The scales will activate
automatically.
3. Your weight will be displayed first, and the scales will then search for your personal
memory location. Should two memory locations with very similar weight values exist,
then both memory places (e.g. P1 and P2) will be displayed simultaneously. Select the
memory location on the left by pressing the ◄ button, or the one on the right by
pressing the ► button. The signal 'o' will now run twice from left to right across the
display, while the body analysis is calculated. Keep standing still. Once complete, the
result values will be shown on the display as follows:
Constant Your weight in kg
1. Your body fat in % (FAT)***
2. Your body water in % (TBW)
3. Your muscle mass in % (MUS)
4. Your bone mass in kg (BONE)
*** An analysis will be shown at the very bottom of the display, while your body fat
percentage is displayed:
= Body fat % too low
= Body fat % in healthy range
= Increased body fat %
= Body fat % too high
The measured values will be displayed twice more in succession, then the scales will
deactivate automatically.
The percentage of body fat shows the percentage of fat in relation to the total weight of a
body. There is no general recommendation for this value, since this depends significantly
on gender (due to the different physique) and age. Body fat is vital for the daily body
functions. It protects organs, cushions joints, regulates body temperature, stores vitamins
and acts as an energy storage for the body. With the exception of high-performance
athletes, a body fat percentage for women between 10 % and 13 % and for men between
2 % and 5 % is regarded as vital.
The percentage of body fat is not a clear indicator for health. A body weight and a
percentage of body fat which are too high are related to many diseases of civilisation such
as diabetes, cardiovascular diseases, etc. A lack of exercise and the wrong diet are the
most common causes for these diseases. There is a clear causal connection between
being overweight and a lack of exercise.
A significant part of the human body consists of water. This body water has a different
distribution throughout the body. Lean muscle tissue contains about 75 % water, blood
approx. 83 % water, body fat approx. 25 % water and the bones have a water percentage
of about 22 %.
4
5
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ade BA 1210 Jette at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 1210 Jette in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info