Manual Ade BA 1117 Fanny (page 8 of 28) (English, German, Dutch, French, Italian, Spanish)

641803

Zoom out

Zoom in

1/28

There is a little push button left beside the battery case at the bottom of the scale for

country specific settings with the option to switch from kg = kilogram to lb = pound or to

st:lb = stone: pound. Please pay attention to use the scale under consideration of your

country specific unit of weight.

4. Programming / Enter of personal data

Before first time use, your personal data like gender (female or male), age, and body

height must be programmed and saved under selected locations P0 – P9 (up to 10

persons). The scale is equipped with highly sensitive touch buttons. The touch buttons

are located below the display. To enter your personal data please utilise the buttons: SET

(on and save button),  (plus button),  (minus button) and follow the particular points:

1. Touch lightly the SET-button. The display indicates flashing “P0”. To select your

personal location (P0 – P9) touch the -

or -button. After the selection of your

personal location, touch the SET-button to save the reading.

2. After you have selected your personal location (e.g. P3), the symbol for gender starts

to flash. To select the requested gender ( male or female) touch the

- or -

button. After the selection of your gender, touch the SET-button to save the

reading.

3. After you have selected your gender (e.g. female), the symbol for body height starts

to flash (default 170 cm). To enter your body height, touch the -

or -button. After

the selection of your body height, touch the SET-button to save the reading.

4. After you have selected your body height, the symbol for age starts to flash (default

age 30). To enter your age, touch the -

or -button. After the selection of your age,

touch the SET-button to save the reading.

The scale indicates once again your selected personal data. That settles the completion

of input and the scale returns to the indication “0.0 kg”. The scale is ready to use and

you may now start your body analysis. Without further activity the scale automatically

power-off. Your personal data are stored.

If you push the -

or -button within 2 seconds after the first complete input, you can

directly enter the personal data of a further person. Alternatively, you repeat the complete

steps listed below for further entries of personal data.

5. Weighing function (weight measurement only)

1. Switch on the scale by using the step-on-function. Just step on the scale. Remain

stationary on the weighing platform and do not hold you tight.

2. After the scale levelled-off, your weight will be indicated successively three times

and then for 10 seconds steady. Afterwards the scale will switch off automatically.

6. Body Analysis

An analysis is only possible in bare feet. Your personal data must be entered first (please

see page 4).

1. Switch-on the scale by touching the SET-button. At first, the display indicates the

personal data of the last setting and a few seconds later “0.0 kg”. If this is not your

personal memory location, use the - or -button to select your personal location. The

display indicates your personal data and afterwards “0.0 kg”.

2. Now, carefully step in bare feet on the right and left stainless steel electrodes

(measuring units) of the scale and remain stationary.

3. At first, your weight will be indicated on the display. Remain stationary on the scale.

Shortly after, while the analysis is taking place, the signal “o” starts to move on the

display. After completion of the measurement, your measured values will be shown

successively 3 times as follows:

1. your weight in kg

2. your body fat in % and beneath an assessment by subtitle:

Underfat, Healthy, Overfat, Obese

3. your body water in %

4. your muscle mass in %

5. your bone mass in kg

6. your daily calorie requirement (basal metabolic rate) in kcal

7. your BMI (body mass index)

After a few seconds the scale switch-off automatically.

The body fat content is shown as the amount of stored fat as a percentage of total body

weight. There is no generally accepted set value as this varies significantly according to

gender (due to the different build) and age. Body fat is vital for basic body functions. It’s

protecting organs, cushioning joints, regulating body temperature, storing vitamins and

serves the body as energy storage. As essential for women a minimum body fat

proportion between 10% and 13% and for men between 10% and 13% is requested -

with the exception of competitive athletes.

Body fat is not a clear indicator for health. Too high body weight and a too high body fat

proportion are linked to the incidence of many civilization diseases such as diabetes,

cardiovascular diseases, etc. Lack of movement and improper nutrition are often the

prime course for these diseases. There is an obvious direct relationship between

overweight and lack of movement.

A significant part of the human body consists of body water. This body water is differently

distributed throughout the whole body. Lean muscle tissue contains approx. 75% body

water, blood approx. 83% body water, body fat approx. 25% body water and bones have

a water content of about 22%.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ade BA 1117 Fanny in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ade BA 1117 Fanny Manual

Product: