461422
52
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 50
Issue 1.2
15. PATCH
15.1 OVERVIEW
The “patch” allows you to patch (connect) DMX slots (addresses) to channel (fader) numbers
enabling to control up to 512 DMX slots. Patches are required when;
A particular channel number is to control a different DMX (dimmer) slot number.
A single channel is to control several different DMX slots.
There are more DMX slots to be controlled than there are desk channels.
A direct 1 to 1 connection from channels to their respective DMX slots can be selected to
speed up the patching process.
The patch allows you to patch any DMX slot to any channel number. A patch level may be
set for every patch. A single channel may be patched to multiple DMX slots.
If no patches exist, either due to a “Total Reset” or if all patches have been removed (below)
the patch will be automatically bypassed giving a direct 1 to 1 connection between channel
numbers and their matching DMX slot numbers. When any patch is made by the user, the
bypass is automatically removed and only the user’s patches will exist.
15.2 REMOVE All PATCHES
To remove ALL patches; HOLD [function], tap [patch]. Press; [remove], [yes].
The patch is now automatically bypassed providing a 1 to 1 patch.
15.3 PATCHING
Patching is performed by “editing the patch”.
To edit the patch; HOLD [function], tap [patch], press [edit].
To select the dimmers DMX slot number, press [<] or [>] or rotate the EDIT Wheel.
To patch the selected DMX slot to a channel number, press the [f/a] button of the channel
number The channel f/a button will flash to show the patch.
To select another dimmers DMX slot number, press [<] or [>] or rotate the EDIT Wheel and
patch it to a channel by pressing the channels [f/a] button. Continue to select DMX slots and
patch them to channels.
As each patch is made, the optional video output screen Video 2 shows the channel number
and name, DMX slot and patch level.
Patched channels f/a buttons remain lit.
When scrolling through the DMX slots, as each slot number is selected, if a channel is
patched to that slot, its f/a button will flash.
When finished patching, press; [edit].
The patch is automatically saved
15.4 PATCHING MULTIPLE SLOTS
To automatically patch a sequential range of DMX slots to a sequential range of channels,
edit the patch (above), then select the first DMX slot number in the sequence. Press and
HOLD the [f/a] button of the channel number to be patched to that slot then tap the [f/a]
button of the channel to be patched to last DMX slot number in the sequence. All channels in
the selected range are automatically patched to their respective slots.
For example, to patch a rack of 12 dimmers with a starting DMX slot of 100 to channels 13 to
24 respectively, press [<] or [>] or rotate the EDIT Wheel to select DMX slot100, then press
and HOLD [f/a] (13) and tap [f/a] (24).
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB ME1163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB ME1163 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB ME1163

ADB ME1163 User Manual - German - 72 pages

ADB ME1163 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info