461422
42
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 40
Issue 1.2
To see the level of any channel, press its [f/a] (channel number) button.
Whilst the channels f/a button is held down, the display shows the channel number.
When the f/a button is released, the display shows the level of that channel in the step.
To edit the level of the selected channel, rotate the EDIT wheel.
If the level is varied above its recorded value it is prefixed by a + sign. If it is varied below its
recorded value it is prefixed by a - sign. If the level is restored to its original value no sign is
shown.
Press and release further channel [f/a] buttons to read and/or edit their levels.
Note: If the chaser step that you modify is a submaster memory, then that actual submaster
memory is edited, not just the chase step. If you directly edit a submaster memory
and that submaster memory is a step in a chase, then the changes will be seen in the
chaser.
To modify other steps, press [step/stop] to step the chaser then again select any channels
to be modified with their f/a buttons.
If necessary press [>] or [<] to start the chaser again in the desired direction.
When finished editing press [edit].
All changes are automatically saved.
11.8.4 EDITING A CHASER NAME
Names are edited in the same way as they are recorded, not from edit mode. See “NAMING
A CHASER” above for details.
11.9 COPYING A CHASER
To copy a chaser, press; [assign/copy]. [Bank B] [f/a] [Bank B] [f/a]
If the selected submaster memory location has already been used, the display will read
WARNING submaster exists – overwrite?”. You now have two options.
To erase the existing submaster and replace it with the copy either press [yes] or [f/a]
(existing submaster to overwrite).
To pick another submaster press [f/a] (new submaster memory location).
The copy process may be abandoned at any time prior to entering the destination submaster
by pressing [assign/copy] a second time. That is, de-selecting it.
Hint: If you have recorded a chaser and you want to experiment with some changes, make a
copy of the chaser and edit the copy. In the event that your changes are unsatisfactory, the
original remains unaltered.
11.10 REMOVING A CHASER
To remove (delete) a chaser from a submaster, press [remove].
If required, repeatedly press [page] until the required page number is displayed, then press
[f/a] of the chaser to be removed.
The display asks you to confirm your action. Press [yes].
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB ME1163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB ME1163 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB ME1163

ADB ME1163 User Manual - German - 72 pages

ADB ME1163 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info