461422
32
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 30
Issue 1.2
9.3 SUBMASTER MEMORY PLAYBACK IN SUBMASTERS
When you set the Mode to “memory”, the Bank B content in the current page is copied, in
order, to their respective Submasters.
If you change Bank B number, the Bank B content in the selected number is copied, in order,
to their respective Submasters.
Note: Mode/Bank B freeze rules apply. See the “SUBMASTER MEMORY STRUCTURE”
section for more details.
9.3.1 CONTROLLING A SUBMASTER MEMORY IN A SUBMASTER
To reveal a submaster memory recorded on a submaster on the output, press [mode] until
its “memory” LED lights. If necessary, select the page containing the submaster memory
using the [Bank B] button.
The scenes can be faded in or out as required or they may be “Flashed” (soloed or bumped)
via their [f/a] buttons.
9.3.2 FADE TIMES
To control the fade times of the submaster memory in submaster you can either use the
submaster memory time or the submaster time.
Select” allows you to change the in and out fade times in the submaster without affecting
the original submaster memory.
Press [Select], [f/a] (submaster), [function].
The “in” indicator lights. The display prompts you then shows the IN fade time. The fade
time may be changed by rotating the EDIT wheel. When a time is set lower than 0 seconds,
it is controlled by the rotating speed fader.
Press [function] until the “out” indicator lights. The display prompts you then shows the
OUT fade time. The fade time may be changed by rotating the EDIT wheel. When a time is
set lower than 0 seconds, it is controlled by the rotating speed fader.
When you have finished adjusting the times, press [Select].
The changes that you have made are retained in the submaster until such time as the
submaster memory is replaced on that submaster (by changing Bank B or mode).
To restore the original submaster memory to the submaster press [copy], [f/a] to the same
[f/a].
Edit” allow you to directly change the submaster memory settings. In addition to changing
the fade times you can edit the channel levels of the submaster memory. These changes are
automatically saved as you edit. If the submaster memory is currently on a submaster, then
these changes are also seen live on that submaster. Edit is described below.
9.3.3 EDITING IN A SUBMASTER
You may edit a submaster memory live or blind (faded down) on its submaster. If the
submaster memory is faded up on stage you will see the changes. When you edit the
submaster memory its channel levels are shown on LED indicators and on the optional VGA
monitor. The LEDs intensity reflects the levels of those channels in the scene.
To edit a submaster memory on a submaster, press; [edit], [f/a] (submaster).
To edit a submaster memory (in the Grab master), press; [edit], [f/a] (Grab master)
To edit a submaster memory in a different Bank B, press; [edit], [Bank B], [f/a]
(submaster).
The FUNCTION button flashes to show that it is active. It allows you to read and edit actual
channel levels and fade times for the submaster memory (see below). Repeated presses of
[function] will cycle the display through channel LEVEL(%), IN time setting, OUT time setting
and the Bank B number. These editing processes are described below.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB ME1163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB ME1163 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB ME1163

ADB ME1163 User Manual - German - 72 pages

ADB ME1163 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info