461422
23
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 21
Issue 1.2
6.4 NAMING THEATRICAL MEMORIES
To name a theatrical memory, press [Edit] press [OK] select with the wheel the theatrical
memory; HOLD [function], tap [f/a] (name), The display says “Edit Step Name”.
Either rotate the EDIT wheel or press the Bank A [f/a] buttons for the desired characters or
the bank B [f/a] buttons for numbers 1 to10 (0) as labelled below the buttons. Where several
characters are printed below each button, multiple presses select the next character in a
similar fashion to a mobile telephone keypad.
Press [<] or [>] to move the cursor and press [remove] or [add] to remove or add characters
or spaces. When finished, press [ok].
6.5 EDITING A Theatrical Memory
You may edit theatrical memory live or blind; directly in the theatrical memory list or in the
stage and preset.
To edit in blind press press [Edit] and [ok] and select the memory by wheel the [<] or [>]
buttons.
Editing in stage (Live) and Preset (Blind) please read the theatrical cross-fade chapter below.
You can change fade and link times and edit the contents of the theatrical memory.
The [function] button flash. Repeated presses of [function] will cycle the display through
channel LEVEL(%), IN time setting, OUT time, link setting and theatrical memory number.
The use is described below.
When finished editing, press [edit].
Changes are automatically saved.
6.5.1 CHANNEL LEVELS
To read and/or edit the level of any channel in a theatrical memory, edit the theatrical
memory then press [Function] until level indicator lights.
The display shows the level of the channels in that theatrical memory.
To edit the level of the selected channel, press [f/a] of the channel and rotate the EDIT
wheel. If another channel needs to be edited; press [f/a] of the selected channel and rotate
the Edit wheel.
If the level is varied above its recorded value it is prefixed by a + sign. When a parameter is
varied below its recorded value it is prefixed by a - sign. If the level is restored to its original
value no sign is shown.
When finished editing press [edit].
All changes are automatically saved.
6.5.2 FADE TIMES
To read and/or edit the IN or OUT fade times in a theatrical memory, edit the theatrical
memory as described above then use the function button to select each time
IN TIME.
Repeatedly press [function] until the “in” indicator lights. The display prompts you then
shows the IN fade time. The fade time may be edited by rotating the EDIT wheel. When a
time is set lower than 0 seconds, it is controlled by the rotating speed fader.
OUT TIME.
Repeatedly press [function] until the “out” indicator lights. The display prompts you then
shows the OUT fade time. The fade time may be edited by rotating the EDIT wheel. When a
time is set lower than 0 seconds, it is controlled by the rotating speed fader.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB ME1163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB ME1163 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB ME1163

ADB ME1163 User Manual - German - 72 pages

ADB ME1163 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info