461422
13
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 11
Issue 1.2
2. GETTING CONNECTED
*
Note: USB option - Standard available on DOMINO 24 U and DOMINO 48U
2.1 POWER INPUT
An IEC mains input socket is located on the rear panel and a POWER switch is beside the
power input. The DOMINO has a universal power supply that will operate on voltages
between 90 volts and 260 volts with a frequency range from 47 to 63 Hz.
2.2 DMX DIGITAL OUTPUT (DMX 512)
The DOMINO 24 and 48 models have a single DMX512 output connector located on the rear
panel. Connect a DMX data cable from the DMX512 output of the DOMINO to the DMX512
input of your equipment (dimmers, moving fixtures etc) and set the required DMX slot
address on your equipment.
2.3 VIDEO MONITOR
If your DOMINO is fitted with the optional VGA output (USB Option), connect a SVGA (or
better) computer monitor to the 15 pin VIDEO connector on the rear of the DOMINO.
See “VIDEO” in the “UTILITIES” section for more details.
2.4 SWITCHING ON
At this point, with the mains power and DMX connected, the DOMINO is ready to be
operated. Simply switch on the “POWER” switch located near the mains input connector on
the rear of the DOMINO.
The DOMINO will commence its start up procedure. After briefly displaying the opening
message, the DOMINO will commence operating in exactly the same state that it was in
when it was last switched off. All the theatrical memories, submaster memories, cue lists,
chasers, patches etc will be as they were.
2.5 SWITCHING OFF
The DOMINO has an inbuilt back up power supply. When the power is switched off (or there
is an unexpected blackout), you will hear a click followed a few seconds later by another
click. The DOMINO keeps operating on its own power supply until the second click is heard.
During this time all memories are automatically saved to non volatile storage.
Product
identity plate
Midi
*
USB
*
Video
*
*
DMX 512
Output
Audio
Input
Desk
lamp
Main input
Fuse Holder
Power
Switch
PS Reset
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB ME1163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB ME1163 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB ME1163

ADB ME1163 User Manual - German - 72 pages

ADB ME1163 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info