461421
60
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 58
Issue 1.2
18.2.3 POWER ON RESETS
If the DOMINO is not responding you will not be able to perform a reset as described above.
In this case, switch off the DOMINO and wait for approximately 10 seconds then;
To perform a “system reset” at switch on; HOLD [function], switch on, release
[function].
To perform a “TOTAL reset” at switch on (also known as a COLD START);
HOLD [no] + [yes], switch on the power and when the scrolling message finishes,
release [no] + [yes].
18.3 MEMORY PROTECT
The DOMINO can be locked to prevent unauthorised changes. Three levels of lock are
available.
Hint: Always save your show before locking the DOMINO.
HOLD [function], tap [f/a] (set-up).
The display asks “Lock Console?
Lock PATCH. The patch cannot be edited
Lock SAVE. Memories cannot be saved or edited.
Lock All. The current DOMINO output continues but all controls are locked except for the
[function] button which is used to unlock the DOMINO.
You can select any of the three options by pressing its [PM] button. The selected option
flashes. To accept the flashing option press;[yes].
The display scrolls “Enter Code”. Two levels of security are available:
For low level security without a code press [ok], [ok].
For high level security use the channel B [f/a] buttons 1 to 9 (use 10 as 0) to enter a 1 to
4 digit lock code then press [ok].
Repeat the same digits then press [ok].
The console is now locked.
18.3.1 UNLOCK
To unlock the DOMINO;
HOLD [function], TAP [f/a] (set-up).
The display asks “Unlock Console?”.
Press [yes].
The display scrolls “Enter Code”.
If the console was locked with low level security simply press [ok].
If the console was locked with high level security use channel B [f/a] buttons 1 to 9 (use
10 as 0) to enter the same digits used to lock the console then press [ok].
The console is now unlocked.
18.3.2 LOST LOCK CODE
If you lock the DOMINO and forget the code you have two choices:
1. email domino@adblighting.com
or contact your local ADB agent including the serial
number of your DOMINO (located on the rear panel). An unlock code will be emailed to you
(or your agent).
2. Perform a “Cold Start” which does a total reset and destroys ALL memories and show
information. To perform a cold start, switch OFF the DOMINO and wait for 30 seconds.
HOLD down the [yes] + [no] buttons and switch ON the DOMINO. Wait until the scrolling
message finishes then release the two buttons.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB Domino 48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB Domino 48 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB Domino 48

ADB Domino 48 User Manual - German - 72 pages

ADB Domino 48 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info