461421
47
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 45
Issue 1.2
13.4.4 STARTING A CROSSFADE
To crossfade from the current step to the next step, press;[ >] (forward).
The crossfade will occur with the incoming step fading in, in its IN time and the outgoing step
fading out in its OUT time. The display momentarily shows the step number of the incoming
step.
To momentarily see the step number again, hold down [stop/step] (cue list master).
To continuously see the step number on the display press [select], [cue list flash]. To turn
off the display press [select].
While the crossfade is in progress, the > (forward) button flashes for the duration of the IN
fade and the < (reverse) button flashes for the duration of the OUT fade.
Each press of the [ >] (forward) button will start the crossfade to the next step.
Note: You do not have to wait for a step to complete before starting the next step.
13.4.5 CROSSFADING TO THE PREVIOUS STEP
To crossfade from the current step to the previous step, press;
[<] (reverse).
You may only crossfade back one step. You may however STEP back to any step. See
“STEPPING A CUE LIST” below
13.4.6 STOPPING A CROSSFADE
To stop a crossfade in progress press; [step/stop].
When a crossfade has been stopped, the > (forward) button, < (reverse) button and step/stop
buttons all flash.
13.4.7 STARTING A STOPPED CROSSFADE
To start a stopped crossfade in the forward direction, press;[>] (forward).
To start a stopped crossfade in the reverse direction, press;[<] (reverse).
To momentarily run a stopped crossfade in the current direction;HOLD [step/stop].
The crossfade only progresses whilst [stop/step] is held down.
13.4.8 REVERSING A CROSSFADE
To reverse a crossfade in progress and return to the previous step, press;[<] (reverse).
13.4.9 STEPPING A CUE LIST
If a cue list is stationary (idle between steps), you may step (instant change, no times
executed) through the cue list in either direction.
To instantly step a cue list in the forward direction;HOLD [step/stop], tap [>] (forward).
To instantly step a cue list in the reverse direction;HOLD [step/stop] ,tap [<] (reverse).
13.4.10 RANDOM STEP SELECTION
To randomly jump to any step in a cue list;HOLD [stop/step] and rotate the EDIT Wheel.
The display shows the selected step number. A + or – sign indicates that the selected step is
higher or lower than the current step. The current step has no sign.
When the [stop/step] button is released, the cue list jumps to the selected step.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB Domino 48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB Domino 48 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB Domino 48

ADB Domino 48 User Manual - German - 72 pages

ADB Domino 48 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info