461420
54
Zoom out
Zoom in
Previous page
1/68
Next page
DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 52
Issue 1.2
16. STL (SOUND TO LIGHT) and SyncoBEAT
16.1 OVERVIEW
The DOMINO has two identical STL (Sound to Light) processors called “stl 1” and “stl 2”.
Each STL produces output pulses that can be “connected” to any submaster containing a
chaser. When a STL is connected to a chaser, it will trigger a chaser step whenever there is
a pulse on the STL output.
Each STL has two modes of operation;
Sound to Light mode. The STL pulses are generated by the beat of the music
connected to the audio input of the maXim.
SyncoBEAT mode. The STL pulses are generated from a beat pattern that you teach.
Each STL may be connected to any number of chasers.
Both STL’s may be connected to the same chaser to give dual stepping control.
The “Beat” indicator on the video display always shows the stepping of the STL output
pulses.
16.2 CONNECT STL TO CHASER
An STL must be “connected” to a chaser to enable it to control the chaser stepping. There
are 2 ways to connect the output of a STL to a chaser.
16.2.1 CONNECT TO SUBMASTER
This method temporarily connects the STL to the selected Submaster. The recorded chaser
is not changed, only the way that it is currently being played back.
HOLD [function], tap [f/a] (stl 1) or (stl 2).
HOLD [function], until the display reads “Pick”.
Whilst still holding [function], tap [f/a] of the submaster(s) to be connected.
Submaster already connected to STL’s flash continuously.
Submasters NOT connected to STL’s flash, then pause, then flash again etc.
If a submaster is already connected, tapping its [f/a] disconnects it.
Press [edit] to finish.
The submaster remains connected to the STL until the chaser is replaced on that submaster
by either changing pages or changing the mode.
16.2.2 CONNECT TO CHASER.
To permanently connect a STL to a chaser, whilst recording or editing a chaser, repeated
presses of the [function] button will toggle the display between the STEP number, the
SPEED and the CROSSFADE.
When the STEP number is displayed;
HOLD [function],tap either [stl 1] or [stl 2] (which are flashing).
To connect the STL press [yes].
If the STL is already connected, pressing [yes] disconnects it.
Finish recording or editing the chaser as described in the “CHASERS” section.
The chaser remains connected to the STL unless it is “edited” to remove the connection.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ADB Domino 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ADB Domino 24 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ADB Domino 24

ADB Domino 24 User Manual - German - 72 pages

ADB Domino 24 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info