620410
10
Zoom out
Zoom in
Previous page
1/68
Next page
System Control - ACVMax: 660Y2800 • B
en
10
EN
FR
NL
ES
IT
DE
PL
RU
APPLIANCE DESCRIPTION AND OPERATION
CH & DHW Settings / Heating settings (Cont’d)
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max. CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
Abs. Max
CH Setpoint
87°C
20°C 87°C
Absolute Max CH Setpoint limits the setpoint during a central heating call. This setting can
be used to prevent a user from adjusting the central heating setpoint or outdoor curve above
a safe operating temperature in the EZ Setup Menu. A warning screen will be displayed in EZ
Setup if the user attempts to raise the setpoint above the Absolute Max CH Setpoint. The Ab-
solute Max CH Setpoint will be displayed on the outdoor curve in EZ Setup if the user selects an
outdoor curve which goes above the Absolute Max CH Setpoint.
Press the LEFT or RIGHT buttons to adjust the Absolute Max CH Setpoint then press the OK
button to store the setting.
Default: 87°C
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
CH1 Max.
Setpoint
82°C
20°C 87°C
CH1 Maximum Setpoint is the maximum setpoint for a CH1 heating call when an Out-
door Curve option is chosen in Demand Type. CH1 Maximum Setpoint is the xed setpoint
for a CH1 heating call when a Setpoint option is chosen in Demand Type.
Press the LEFT or RIGHT buttons to adjust the CH1 Maximum Setpoint then press the OK
button to store the setting.
Default: 82°C
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
CH1 Min.
Setpoint
49°C
15°C 87°C
CH1 Minimum Setpoint is the minimum setpoint for a CH1 heating call when an Out-
door Curve option is chosen in Demand Type. This setting is not applicable when a Set-
point option is chosen in Demand Type.
Press the LEFT or RIGHT buttons to adjust the CH1 Minimum Setpoint then press the OK
button to store the setting.
Default: 49°C
49
18
82
CH1 (°C)
O.T. (°C)
-12
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV Prestige in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info