620411
32
Zoom out
Zoom in
Previous page
1/68
Next page
CH & DHW Settings
Boiler Settings
Boiler Settings
Prestige Model Solo (2 pumps)
Lockout Temp. 221°F [105°C]
Modbus Address 1
Pump settings
Ignition Level 3100rpm
Pump Settings
Current Pump Cong Modied
Preset Pump Cong
Flexible Pump Cong
Preset Pump Cong
Cong 1
Cong 2
Cong 3
Cong 4
Cong 5
Cong 6
System Control - ACVMax: 660Y2800 • B
en
32
EN
FR
NL
ES
IT
DE
PL
RU
CONFIGURATION OF REGULAR SYSTEMS  PRESTIGE SOLO 2 PUMPS
This section contains information on the electrical connections, hydraulic connections and ACVMax
controller set-up for Prestige 42-50-75-100-120 Solo, that are required to operate the system
conguration you have selected.
For simple congurations, the EZ setup function of the ACVMax can be used (refer to the Installation,
Operation and Maintenance manual provided with the appliance).
For more complex systems, with additional pumps, several congurations have already been preset
in the ACVMax controller to help you. Please refer to the following pages to see the predetermined
congurations as well as the relevant information for the cascade systems.
For any system that is not mentioned in this manual, please contact your ACV representative.
GENERAL
PUMPS
The pump congurator system is based on the demands of the hydraulic system that you design. In the
table below, you will nd the 13 congurations that have been preset in the ACVMax controller for the
Prestige 42-50-75-100-120 Solo (identied as "Solo (2 pumps)" in the Prestige Model selection menu),
based on dierent hydraulic schemes that can be used.
The table shows which relays are activated under which condition.
The names in the table refer to the demand done by CH1 by CH2 or DHW respectively, the demand to
open close the Motor of a mixing valve or reect the activation of the alarm (error) or Flame output relay.
In the following pages, you will nd these diagrams with a conguration number that corresponds to
the setting in the display.
Cong.
No
Flex 4
ERR
Flex 6
P4
Flex 3
P3
Flex 2
DHW
Flex 1
CH
Flex 5
Flame
1 Error CH2 CH1/CH2/
DHW
DHW CH1 Flame
2 Error CH1 CH1/CH2/
DHW
DHW CH1/CH2/
DHW
Flame
3 Error CH1/CH2 DHW CH1/CH2 Flame
4 Error CH2 CH1/CH2 DHW CH1 Flame
5 Error CH2 CH1 DHW CH1/CH2/
DHW
Flame
6 Error CH1 DHW CH1 Flame
7 Error CH1/CH2 Mix open DHW CH1 low Mix close
8 Error CH2 CH1/CH2 CH1/CH2/
DHW
CH1 Flame
9 Error CH/DHW Mix open DHW CH1 low Mix close
10 Mix open CH1/CH2 CH1/CH2 DHW CH1 low Mix close
11 Mix open CH1/CH2 CH2 DHW CH1 low Mix close
12 Mix open CH1/CH2/
DHW
CH2 DHW CH1 low Mix close
13 Error CH1/CH2 CH2 Mix open CH1 low Mix close
DO NOT generate a DHW demand in preset configuration 13 !!
ACCESSING THE PRESET CONFIGURATION PAGE FOR SOLO (2 PUMPS)
To access the preset conguration page, follow the selections shown on the screens below (Installer menu)
Pump Conguration 1
Flex 4
ERR
Flex 6
P4
Flex 3
P3
Flex 2
DHW
Flex 1
CH
Flex 5
Flame
Error CH2 CH1/CH2/
DHW
DHW CH1 Flame
In the following hydraulic diagrams, this representation is used :
Warm water
Cold water
Do not forget to select the correct
boiler in the Boiler Settings, Prestige
Model.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV Prestige Solo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV Prestige Solo in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info