620411
24
Zoom out
Zoom in
Previous page
1/68
Next page
System Control - ACVMax: 660Y2800 • B
en
24
EN
FR
NL
ES
IT
DE
PL
RU
APPLIANCE DESCRIPTION AND OPERATION
CH & DHW Settings / Boiler Settings (contd)
Flexible Pump Cong
Flex. Relay 1 (CH)
Flex. Relay 2 (DHW)
Flex. Relay 3 (P3)
Flex. Relay 4 (ERR)
Flex. Relay 5 (Flame)
Flex. Relay 6 (P4)
Flexible Pump Cong
Flex. Relay 2 (DHW)
Flex. Relay 3 (P3)
Flex. Relay 4 (ERR)
Flex. Relay 5 (Flame)
Flex. Relay 6 (P4)
Error Relay
Error Relay
On Lockout, Blocking and Warning
On Lockout and Blocking
On Lockout
There are three possible selections to activate the Error Relay (alarm) contact:
On Lockout, Blocking and Warning: the error relay is activated at a non-volatile lock-
out (e.g. CH Flow NTC defect), at a blocking error (self-resetting errors) (e.g. Gas-pres-
sure switch not closed ), or at a warning (e.g. low water pressure warning).
On Lock-out and blocking: the error relay is activated at a non-volatile lock-out or a
blocking error.
On Lockout: the error relay is activated at a non-volatile lock-out only.
The selection depends on the alarm feedback requirement from the customer.
Boiler Settings
Prestige Model Solo (2 pumps)
Lockout Temp. 221°F [105°C]
Modbus Address 1
Pump settings
Ignition Level 3100rpm
Boiler Settings
Prestige Model Solo (2 pumps)
Lockout Temp. 105°C
Modbus Address 1
Pump settings
Ignition Level 3000rpm
Ignition Level NAT
3100rpm
1600rpm 6750rpm
This parameter allows to change the fan start speed of the appliance.
Press the LEFT or RIGHT buttons to adjust the settings, then on OK to validate your selec-
tion.
Default: See table below for each the fan speed applicable to each boiler/gas combination
Reset all settings
Reset All Settings
Reset All Settings
Press OK
to restore factory settings,
any other button
to keep current settings.
Reset All Settings allows the installer to reset all CH, DHW, and Cascade settings back to
the original factory defaults (Refer to page 6 for the factory settings). Follow the onscreen
instructions to reset all settings back to the original factory defaults.
Prestige Natural Gas (G20) Propane
24 Solo 3000 rpm 3000 rpm
24 Excellence 3000 rpm 3000 rpm
32 Solo 3500 rpm 3000 rpm
32 Excellence 3500 rpm 3000 rpm
42 Solo 3800 rpm 3350 rpm
50 Solo 3300 rpm 3300 rpm
75 Solo 3700 rpm 3000 rpm
100 Solo 2600 rpm 2600 rpm
120 Solo 2600 rpm 2600 rpm
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV Prestige Solo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV Prestige Solo in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info