677362
27
Zoom out
Zoom in
Previous page
1/118
Next page
27
EN
14.
Organize all materials and equipment in a
way ensuring easy and safe handling,
avoiding accumulation of materials that may
lead to their falling down or leaning away.
Damage of the appliance or surrounding
objects caused by shaking, hit, cut or
contusion.
15.
Set all safety and control functions
concerned by any work performed on the
appliance into default state and ensure that
they operate properly before re-starting the
appliance.
Damage or shutdown of the appliance
caused by unregulated operation.
7. PUTTING INTO OPERATION
WARNING!
Please follow the general warnings and safety precautions listed in the previous chapter and please
comply with them strictly.
7.1. Placement of water heater
WARNING!
Before starting any installation operation, please ensure that the planned operation location of the water
heater fulfils the following requirements:
a) It should be installed in a location larger than a floorspace of 8 m². Do not place the appliance in a
location that may provide favourable conditions for the creation of ice. Do not place the appliance into
a location where another appliance works that requires air for its operation (i.e. gas furnace, water
heater operated by gas, etc.) It is not allowed to use the hot water tank outdoors or at a place
exposed to rain.
b) In order to ensure adequate operation of the appliance and to ease maintenance, the selected location
has to possess suitable safety distances as measured from the walls and the ceiling (Figures 7.1.-1 and
7.1-2.)
c) Feet fixing: Make sure that the flooring is flat enough, possessing adequate stability. With the help of
the „drill frame” (usage manual), set the positions of the feet fixing, taking into consideration
deployment sizes indicated on figures 7.1.-1, and 7.1.-2. of the usage manual. Mount the 3 feet fixing
items attached to the appliance with screws of M8 size and metal hit anchor drilled into the flooring as
minimum (M8x75), while the feet fixing is positioned according to figure 7.1.-3. Fix the setable feet of
the appliance at a distance of min. 26 mm (see figure 7.1.-4.) Push the appliance carefully into the
direction of the feet fixing srewed down in a way that the setable feet are hit up in the open mortice of
the feet fixing (figure 7.1.-5.).
If the appliance is operated without any feet fixing, it might turn upside down. In this case, the
manufacturer shall not be liable to any damages emerged.
Figure 7.1.-1.
Air inlet
Display
Air outlet
Protective grid
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV HP300C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV HP300C in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info