677361
26
Zoom out
Zoom in
Previous page
1/118
Next page
26
EN
3.
Use manual tools and equipment adequate to
the purpose (it is especially important to
ensure that the tools are not used up, their
handles are intact and fixed safely). Use tools
and equipment in a proper way, so that they
can not fall down from above. Put the tools
and equipment back into their places after use.
Personal injury caused by flying chips or
spills, dust inhalation, hit, cut or stabbed
injuries or bruises.
Damage of the appliance or surrounding
objects caused by falling chips, beating or
cutting.
4.
Use electric equipment adequate for the
purposes. Use the equipment properly. No
feeder wires should be located in the passages.
The equipment should not fall down from
above. Disconnect them from the power
system and put them back into their places
after use.
Personal injury caused by flying chips or
spills, dust inhalation, beaten, cut or
stabbed injuries or bruises.
Damage of the appliance or surrounding
objects caused by falling chips, beating or
cutting.
5.
Parts should be cleaned from fur according
to instructions on the safety data sheet of the
applied product, besides airing of the
location and wearing protective clothing.
Avoid mixing different products and protect
the appliance and the surrounding objects.
Personal injuries cased by acidic materials
touching the skin or the eyes; inhalation or
swallow of harmful chemicals.
Damage of the appliance or surrounding
materials caused by corrosive effect of
acidic materials.
6.
Ensure that portable ladders are placed
safely and that they are adequately resistant,
the steps are intact and slippery free. The
ladder must not be moved when somebody is
on it. A person should always supervise the
operations.
Personal injuries cased by fall down or by
accidental closing of the standing ladder.
7.
Ensure that adequate hygienic conditions are
produced in consideration of lighting, airing
and stability of the relevant structure of the
place of work.
Personal injury caused by hit, fall, etc.
8.
Wear individual protective clothing and
equipment during each work phase.
Personal injuries caused by electric shock,
falling chips or spills, dust inhalation,
shaking, cut or stabbed injuries, bruise,
noise or vibration.
9.
Each operation to be performed within the
appliance should be performed with due
caution, in order to avoid sudden touch of
sharp parts.
Personal injuries caused by cut or stabbed
injuries, bruise.
10.
Before handling the appliance, discharge all
parts that may contain hot water, through
performing water discharge, if necessary.
Burning marks.
11.
Mount electric connections with wires of
adequate cross section size.
Fire caused by overheating as a result of
electric power flowing through undersized
wires.
12.
Ensure the protection of all areas
surrounding the appliance and the work area
with adequate materials.
Damage of the appliance or surrounding
objects caused by falling chips, hit and cut.
13.
Handle the appliance carefully, using
adequate protective tools.
Damage of the appliance or surrounding
objects caused by shaking, hit, cut or
contusion.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV HP300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV HP300 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info