677361
16
Zoom out
Zoom in
Previous page
1/118
Next page
16
EN
13
CLOCK indicator: It displays present time, it blanks during screen protection.
14
E_HEATER MODE indicator: When the user sets the E-heating Mode, it lights up.
15
HYBRID MODE indicator: When the user sets the Hybrid Mode, it lights up.
16
ECONOMY MODE indicator: When the user sets the Economy Mode, it lights up.
.4.3. Operation
4.4. Operation procedure
Preparation before running the appliance
When you run the appliance for the first time, all the indicators on the User Interface will light up for 3
seconds, and the buzzer will “didi” ring twice at the same time, and then display is lit up. After no operation for
1 minute, all indicators will go out automatically, except Water fill indicator which is flashing and the temp.
indicator which is lighting.
When the tank is full, please press the ON\OFF key, then the Water fill indicator will stop flashing and you
can continue to function other settings. When all settings are finished, please press the ON\OFF key again and
the Water fill indicator will go out. And then run the appliance.
When the appliance is running, if there is no operation or malfunction for 20s, the backlight of the display
will go out automatically except the operation model, the outlet temp, the lock indicator. If there is no operation
for 1 minute, the appliance will lock automatically, but the lock indicator would be right all time.
Lock and Unlock
In order to prevent wrong operation, a special lock function has been designed. If there is no operation for 1
minute, the appliance will be locked automatically, and lock indicator will be displayed. When the appliance is
locked, no keys can be operated.
Unlock:
Clock set
The clock is for a 24-hour system and the initial time is 00:00. To make a better use of this appliance, it is
recommended to set the time for accurate local time. Every time powered off, the clock will be reset to the
initial time 00:00.
ON/OFF key, used to turn the
appliance on or off
CANCEL key, used
to cancel time and
clock
MODE key, used to set
different modes
UP key, used to add
time or temperature
CLOCK key, used to
set time
TIME OFF key, used
to set the OFF timer
DOWN key, used to
reduce time or
temperature
TIME ON key, used to
set the ON timer
At the locking status of the display, long press the “CANCEL”
key to remove it. At the screen protection of the display, press
any key to activate the display, and then long press the
“CANCEL” key to remove it. After removal of the locking
mode, the Lock indicator will blank out and all keys could be
used normally.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV HP300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV HP300 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info