Manual ACV Glass BL 2014 (page 15 of 28) (English, Dutch, French)

677364

Zoom out

Zoom in

1/28

DEAR USER!

We ask you to read this installation and operation manual by paying much attention before using

the appliance.

The electric connection, the connection to the water network and the first starting up must be

realised by your installation technician. The appliance is not a toy. It must not be used by persons

with physical, mental or sensorial handicap (including children) and by persons without enough

experience.

Such persons may use the appliance in presence of a person taking care of their security or by

following their instructions.

Do not leave children without attendance and you should make sure that they do not play with the

appliance.

Before fixing the boiler to the wall, verify that the wall can bear the weight of the

appliance filled up with water.

CONNECTION TO THE WATER NETWORK

In the case of hydraulic connection to a

water system made of brass, it is

compulsory to use reduced dielectric sleeves

or equal male-female sleeves made of

malleable cast iron. Should the thread of the

tubes, which are not provided with such

sleeves, be attacked by corrosion, our

guaranty cannot be applicable.

The hot water-cold water connection of the

appliance should be realised by following the

diagram in fig. 1 (drawing of the boiler +

safety group) and in compliance with the

applicable legal regulations. Do not expose

the boiler to pressure exceeding 7 bars in

any case otherwise the appliance will suffer

irreparable damages. Recommended safety group: safety group of 6 bars manufactured by

RITMONIO Company, matching the tube connection of the appliance.

1. It is compulsory to mount a safety group complying with the standards to the cold water inlet of

the appliance. This combined group contains a check valve and a safety valve. This safety

valveopens where the pressure increases to 6.3 - 7 and closes at 6 bars, in addition, it has a

stopcock.

2. The discharge pipe at the outlet of the appliance should be put to a place protected from freeze,

for insuring free flow.

Strictly follow the installation diagram because the good functioning of the boiler depends on it.

If the operating pressure exceeds 6 bars, a pressure reducer must be mounted in front of the

safety group.

4. If one or several mixing faucets are used, a check valve is to be mounted to the cold water

column supplying the mixing faucets.A stopcock has to be placed on the cold water supply of the

appliance.

The safety group may leak, therefore the drain pipe must not be obstructed!

6. The safety group is not an accessory of the appliance.

FUNCTIONING

This closed-system appliance is intended to

produce hot water in households and institutions.

The hot water can be used for both sanitary and

consumption purposes .

The water temperature of the boiler can be

adjusted depending on your needs (65 °C).

After having achieved the adjusted or preferred

temperature, the temperature regulator switches

off the heating automatically. In this way there is

hot water in the boiler for a long time. The

polyurethane insulation in the internal tank

prevents the fast cooling of the hot water,

therefore, the water remains hot for a long time.

Hot water flows out without mixing with cold

water.

ENG

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ACV Glass BL 2014 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 5,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ACV Glass BL 2014 Manual

Product: