524608
4
Zoom out
Zoom in
Previous page
1/30
Next page
2
3
4
5
10
12
13
11
1
6
7
8
9
14
16
17
18
15
12
E-Tech W : 664Y6500 • B
en
4
EN
FR
NL
ES
IT
DE
PL
RU
INTRODUCTION
DESCRIPTION OF THE SPECIFICATIONS
This wall hung electric boiler is available in 7 models:
The models Single phase 09 and 15 are supplied with 230 V.
The models Tri phase 09, 15, 22, 28 and 36 are supplied with 400 V.
The maximum power can be adjusted for all models by acting on
the switches on the control panel.
The maximum power can be adjusted for this models by acting on
the terminals bridges.
Adjustable power
MODELS MIN MAX
E-Tech W 09 - Single phase 5.6 kW 8.4 kW
E-Tech W 15 - Single phase 9.6 kW 14.4 kW
E-Tech W 22 - Tri phase 14.4 kW 21.6 kW
E-Tech W 22 - Tri phase 14.4 kW 28.8 kW
E-Tech W 36 - Tri phase 18 kW 36 kW
LINING
The boiler is protected by a steel lining that first of all undergoes a
degreasing and phosphation process before being lacquered and
burnt at 220°C.
HEATING BODY
The boiler heat exchanger is constructed from mild steel with welded
joints. It is hydraulic tested under a pressure of 4.5 bar (maximum
working pressure = 3 bar).
HEATING ELEMENTS
Immersion heaters, constructed from stainless steel Incoloy 800 and
mounted in the top of the boiler, provide the power source for the
Boiler.
EQUIPMENT
The boiler is equipped with all the necessary components to allow
direct connection to a heating system without the need for a feed
and expansion cistern. These components include; primary 10 litre
expansion vessel (suitable for a system water content of up to 160
litres), pressure and temperature gauge, safety valve, circulating
pump, low water pressure switch, control and high limit thermostats,
on/off and power level switches.
CONNECTION
The boiler is suitable for connection to most heating and hot water
systems, with a maximum working pressure of 3 bar and a maximum
temperature of 87°C. It can also be used in multiple boiler installations
allowing greater outputs to be achieved.
The boiler, and connection glands for both the main power supply
and optional external controls are provided, suitable for single or
three phase electrical supply depending upon boiler output required.
An internal 3 amp MCB is provided to protect the internal control
circuit, from which optional controls can be connected e.G. Internal
or external timeclock.
CERTIFICATION
The boilers have been manufactured to comply with the following
standards BS EN60335-2-35: 1998, BS EN55014-2:1997 and BS
EN50081-1-1: 1992.
LEGEND
1. Top cover
2. Brass pocket
3. Hand side panel
4. Cable gland
5. Control panel
6. Automatic air vent
7. Heating element
8. Heating body
9. Pressure safety valve
10. Rear panel
11. Water pressure switch
12. Expansion vessel connection
13. Heating return
14. Expansion vessel
15. Valve of expansion vessel
16. Circulating pump
17. Heating ow
18. Manual reset hight limit thermostat
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV ETech W 36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV ETech W 36 in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACV ETech W 36

ACV ETech W 36 User Manual - German - 30 pages

ACV ETech W 36 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info