620300
11
Zoom out
Zoom in
Previous page
1/14
Next page
en
11
EN
661Y1000 • F
BRINGING INTO SERVICE
FILLING THE DHW TANK
Before bringing the hot water tank into service, check the connections to avoid any
any risk ofleaks during filling.
The sealing of the DHW tank must only be checked with the feed water.
Thetestpressure on the site must not exceed a pressure surge of 10 bar.
The DHW tank must always be filled and pressurised before filling and pressurising
the heating circuit.
To vent the DHW installation, simply open
the highest hot water valve (8).
Fill the domestic hot water tank, by opening
the stop valves (1).
Close the hot water valve (8), after the water
flow has stabilised and the air has been
completely evacuated.
Check all connections of the installation for leaks.
FILLING THE HEATING CIRCUIT
OF THE TANK
Do not use vehicle or
non-dilutedantifreeze.
This can causeserious injury, lead
toloss of life or damage rooms.
Check that the drainage valve (6) for your
primary installation is fully closed.
Open the isolation valves (1) and (4) of the
heating circuit connected to the boiler.
Open the air vent valve located in the
upper part of the hot water tank.
In addition, follow the instructions
provided with the boiler for filling.
Open the valves (5) to start filling.
When the air is eliminated, first close the
airvent valve, then the filling valves (5).
If antifreeze is needed in the primary circuit, it must comply with Public Hygiene Regulations
and must not be toxic. A food grade of Propylene Glycol is recommended. Consult the
manufacturer to determine the compatibility of the antifreeze with the tank’s construction
materials.
Fill the system with the fresh tap water. Contact your ACV representative or installer
about the use of inhibitors.
1
1
5
9
6
3
1
2
4
7
8
10
11
5
9
6
3
1
2
4
7
8
10
4
3
21
4
3
5
1
6
5
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ACV Comfort 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ACV Comfort 130 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ACV Comfort 130

ACV Comfort 130 Usermanual and installation guide - German - 14 pages

ACV Comfort 130 Usermanual and installation guide - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info