629195
29
Zoom out
Zoom in
Previous page
1/145
Next page
26
Actiontec Broadband Router User Manual
27
Chapter 4 Using Network Connections
Internet Protocol
This section has three options: No IP Address, Obtain an IP Address
Automatically, and Use the Following IP Address.
No IP Address Select this option if the connection will have no IP address. This is
useful if the connection operates under a bridge.
Obtain an IP Address Automatically Select this option if the network connection
is required by the ISP to obtain an IP address automatically. The server assigning
the IP address also assigns a subnet mask address, which can be overridden by
entering another subnet mask address.
Use the Following IP Address Select this option if the network connection uses a
permanent (static) IP address, then the IP address and subnet mask address.
Bridge
The “Bridge section of the Configure Network (Home/Office) screen is used to
specify which networks can join the network bridge.
Note: When a network is disabled, its formerly underlying
devices inherit the networks DHCP settings. For example, the
removal of a network configured as DHCP client automatically
configures the devices formerly constituting the network as
DHCP clients, with the exact DHCP client configuration.
Click in the check box next to the particular network to specify it. Make sure
there are no loops in the network configuration, and apply these settings in case
the network consists of multiple switches, or other bridges apart from those cre-
ated by the Router.
Status The “Status column displays the connection status of a particular device.
STP Click in the devices STP check box to enable Spanning Tree Protocol on
the device. This protocol provides path redundancy while preventing undesir-
able loops in the network.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Actiontec RI408 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Actiontec RI408 in the language / languages: English as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info