Manual Actiontec RI408 (page 10 of 145) (English)

629195

Zoom out

Zoom in

1/145

Connecting the

Router

Connecting a computer or local network to the Broadband Router is a simple

procedure, varying slightly depending on the computer’s operating system, and

designed to seamlessly integrate the Router with the computer or local network.

Moreover, zero-configuration is attained when taking advantage of Universal Plug-

and-Play support in Windows XP.

The Windows default network settings dictate that in most cases, the setup pro-

cedure described in the “Computer Network Configuration” will be unnecessary.

For example, the default DHCP setting in Windows 2000 is “client,” requiring no

further modification.

However, Actiontec advises following the setup procedure described below to verify all

communication parameters are valid and the physical cable connections are correct.

Setting Up the Router

There are three parts to setting up the Router: Connecting the Cables, Configuring

the Router, and Connecting Other Computers.

Connecting the Cables

☞

Note: If a different router was being used, disconnect it. Remove

all the old router components, including power supplies and

cables, since they will not work with the Broadband Router.

1. Get the Router and black Power cord from the box.

2. Plug the black Power cord in the black port on the back of the Router and

then into a power outlet.

3. Turn the Router on.

4. Make sure the Power light on the front of the Router is glows steadily green.

5. Plug the yellow Ethernet cable from the box into one of the eight yellow

Ethernet ports on the back of the Router.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Actiontec RI408 in the language / languages: English as an attachment in your email.

The manual is 5,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Actiontec RI408 Manual

Product: