624503

Acronis vmProtect 6 Manual

41
Zoom out
Zoom in
Previous page
1/95
Next page
41 Copyright © Acronis, Inc., 2000-2011
Community type the name of the SNMP community to which both the host running the SNMP
management application and the sending machine belong. The typical community is "public";
Click Send test message to make sure all your settings are correct.
Do not send SNMP notifications to disable sending the events log of the restore operations to
SNMP managers.
7.4.2 Error Handling
These options enable you to specify how to handle errors that might occur during the restore
operation. Select the Re-attempt, if an error occurs check box for enabling the silent mode.
When a recoverable error occurs, the program re-attempts to perform the failed operation. You can
set the Interval between attempts and the Number of attempts. The task finishes as soon as the
restore operation succeeds OR the specified number of attempts is reached.
If you select the Re-attempt, if an error occurs check box, set up the Number of attempts and the
Interval between attempts. This option is enabled by default with the following settings: Number of
attempts 5, and Interval between attempts 30 seconds. For example, if the restore network
destination becomes unavailable or not accessible, the program will attempt to reach the destination
every 30 seconds, but no more than 5 times. The attempts will be stopped as soon as the connection
is resumed or if the specified number of attempts is reached.
7.4.3 VM power management
These options allow configuring the virtual machines power management before and after executing
the restore backup task.
1) Power off target VMs when starting recovery
Recovery to an existing virtual machine is not possible if the machine is online, and so the machine is
powered off automatically as soon as the recovery task starts. All users will be disconnected from the
machine and any unsaved data will be lost.
This option is enabled by default. Clear the Power off target VMs when starting recovery check box
if you prefer to power off virtual machines manually before the recovery task.
2) Power on target VMs when recovery is finished
After a machine is recovered from a backup to another machine, there is a chance that the existing
machine's replica will appear on the network. For a safe operation, power on the recovered virtual
machine manually, after you take the necessary precautions.
This option is disabled by default. Select the Power On target VMs when recovery is finished check
box for starting up the virtual machine automatically.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis vmProtect 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis vmProtect 6 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info