471509
128
Zoom out
Zoom in
Previous page
1/136
Next page
128 Copyright © Acronis, Inc., 2000-2009
The hard disk with the jumper in master position is treated by the basic input/output
system (BIOS) as bootable.
The jumpers on hard disks that are connected to the same cable can be in the cable
select for master/slave position. In this case, BIOS will deem as "master", the disk
that is connected to the IDE cable, which is closer to the motherboard than the
other one.
Unfortunately, hard disk markin
g
s were never standardized. You mi
g
ht well find that
markin
g
s on your hard disk differ from the ones described above. Moreover, for the old
types of hard disks, their purpose could be defined by two
j
umpers instead of one. You
should study the markings carefully before installing your hard disk in the computer.
It is not enough to physically connect the hard disk to the motherboard and set the
jumpers properly for the hard disk to function — hard disks have to be properly
configured with the motherboard BIOS.
B.2 BIOS
When you turn on your computer, you often see a number of short text messages
before you see the splash screen of your operating system. These messages are
from the POST (power-on self test) program that belongs to BIOS and is executed
by the processor.
BIOS, or the basic input/output system, is a program that resides in the permanent
memory chip (ROM or flash BIOS) on the motherboard of your computer and is its
key element. The version of BIOS that you use "knows" all the peculiarities of all the
components of the motherboard: processor, memory, integrated devices. BIOS
versions are provided by the manufacturers of motherboards.
Main BIOS functions are:
POST checking of processor, memory and I/O devices
initial configuring of all software-manageable parts of the motherboard
initialization of the operating system (OS) booting process
Among numerous components of the computer, initial configuration is necessary for
the external memory subsystem that controls hard disk drives, floppy disk drives,
CD-ROM drives, DVDs, and other devices.
B.2.1 Setup utility
BIOS has a built-in setup utility for initial computer configuration. To enter it, you
have to press a certain key combination (Del, F1, Ctrl+Alt+Esc, Ctrl+Esc, or
some other, depending on your BIOS) during the POST sequence that starts
immediately after you turn your computer on. Usually the message with the
required key combination is displayed during the startup testing. Pressing this
combination takes you to the menu of the setup utility that is included in your BIOS.
The menu can differ in appearance, sets of items and their names, depending on
the BIOS manufacturer. The most widely known BIOS makers for PC motherboards
are Award/Phoenix and AMI. Moreover, while items in the standard setup menu are
mostly the same for various BIOSes, items of the extended setup heavily depend on
the computer and BIOS version.
Below we describe the general principles of initial hard disk configuration.
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Acronis True Image Home 2009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Acronis True Image Home 2009 in the language / languages: English as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Acronis True Image Home 2009

Acronis True Image Home 2009 User Manual - German - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info